D00571E01

Filtro de cartucho Clarigard^®

pore size 0.5 μm, cartridge nominal length 10 in. (25 cm), Code 7 (2-226; O-rings w/locking-tabs)

• Sinônimo(s): Clarigard Cartridge Filter 10 in. 0.5 μm Code 7 Ethylene-Propylene
• Código UNSPSC: 23151806
• eCl@ss: 32031690

Propriedades

• Materiais: EPR seal; polypropylene
• Nível de qualidade: 400
• Características: hydrophilic
• fabricante/nome comercial: Clarigard^®; Clarigard^®
• Parâmetros: 4.8 bar max. differential pressure (70 psid) at 25 °C; 4.8 bar max. inlet pressure (70 psi) at 25 °C
• comprimento nominal do cartucho: 10 in. (25 cm)
• Diâmetro: 7.0 cm (2.75 in.)
• Impurezas: ≤0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
• extraíveis gravimétricos: ≤10 mg
• tamanho de poro: 0.5 μm nominal pore size; 0.5 μm pore size
• entrada: sample type liquid
• código do cartucho: Code 7 (2-226; O-rings w/locking-tabs)

Descrição

Descrição geral

Device Configuration: Cartridge

Nota de preparo

Sterilization Method
10 autoclave cycles or SIP @ 126 °C for 30 min

Nota de análise

Gravimetric Extractables: after 24-h soak in water

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥3 L

Outras notas

Directions for Use

• Organism Retention: 99.99% retention
• Mode of Action: Filtration (nominal)
• Application: BioProcessing
• Intended Use: Bioburden reduction
• Instructions for Use: Please refer to the POLYGARD^® and CLARIGARD^® Cartridges user guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Informações legais

CLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany