CGW671S48

Cartucho Polysep^™ II 1,0/0,5 µm nominal

cartridge nominal length 10 in. (25 cm), filter diam. 2.8 in.

• Código UNSPSC: 23151806

Propriedades

• Materiais: borosilicate glass fiber (BGF) membrane; mixed cellulose esters (MCE) membrane; polypropylene device; polypropylene support (spun bonded); silicone seal
• Nível de qualidade: 400
• conformidade reg.: meets FDA 21 CFR 177–182 (all component materials)
• esterilidade: non-sterile
• Compatibilidade de esterilização: autoclavable compatible; steam-in-place compatible
• linha de produto: Polysep^™
• Características: hydrophilic
• fabricante/nome comercial: Polysep^™ II
• Parâmetros: 3.5 bar max. differential pressure (50 psid) at 25 °C
• técnica(s): prefiltration: suitable
• Comprimento: 10 in.
• Largura: 2.7 in.
• comprimento nominal do cartucho: 10 in. (25 cm)
• device size: 10 in.
• diâmetro do filtro: 2.8 in.
• filter filtration area: 0.46 m²
• Impurezas: ≤0.5 EU/mL bacterial endotoxins (LAL test, aqueous extraction); <0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
• matriz: Polysep^™ II
• pore size: 1.0/0.5 μm nominal pore size; 1.0/0.5 μm pore size
• código do cartucho: Code 7

Descrição

Descrição geral

Device Configuration: Cartridge
Cartridge Type: Liquid
Filter Grade: Prefilter

Aplicação

mAb & r-protein intermediates; Plasma; Vaccines & viral vectors; SVPs LVPs; Cell Culture; Media Filtration; Colloid Removal; Lipid Removal

Características e benefícios

Format: Double Layer

Embalagem

Double Easy-Open bag

Nota de preparo

Sanitization: 30 min with hot water at 80 °C

Sterilization Method: 10 autoclave cycles or SIP at 121 °C for 30 min

This product was manufactured with a Millipore^® media combination which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

Nota de análise

After autoclaving and a 24 hour soak in ASTM^® Type 1 reagent grade water at controlled room temperature, extractables level was ≤140 mg per 10-inch element after a 5000 mL flush.

Cartridges meet the requirements of the USP Oxidizable Substances Test after a water flush of 5000 mL per 10 inch Element

Outras notas

Directions for Use:

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer first page of Visual Inspection Guide and introduction section of Mixed cellulose esters Tech Brief
• Storage Statement: Please refer Mixed cellulose esters Tech Brief
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations

The product is manufuactured in a facility with a Quality Management System approved by an accredited registering body to an ISO 9001 Quality Systems Standard.

Informações legais

ASTM is a registered trademark of American Society for Testing and Materials

Millipore is a registered trademark of Merck KGaA, Darmstadt, Germany

Polysep is a trademark of Sigma-Aldrich Co. LLC