About This Item
Produtos recomendados
Formulário
solid
Nível de qualidade
composição
Dye, ≥75% spectrophotometric assay
pH
3-4 (20 °C, 10 g/L in H2O)
solubilidade
practically insoluble 10 g/L
densidade volumétrica
450 kg/m3
aplicação(ões)
diagnostic assay manufacturing
hematology
histology
temperatura de armazenamento
2-30°C
InChI
1S/C22H24N3.ClH/c1-13-10-16(4-7-19(13)23)22(17-5-8-20(24)14(2)11-17)18-6-9-21(25)15(3)12-18;/h4-12H,23-25H2,1-3H3;1H/q+1;/p-1
chave InChI
ORDGVBRMUJCHEO-UHFFFAOYSA-M
Procurando produtos similares? Visita Guia de comparação de produtos
Categorias relacionadas
Descrição geral
The dye is used in Ziehl-Neelsen and Gram staining as well as for methods with Schiff′s reagent.
The cell wall of acid-fast bacteria (AFB) has a high proportion of wax and lipids and hence absorbs dyes only very slowly. As a measure to enhance the absorption of the fuchsin dye and thus the formation of the mycolate-fuchsin complex in the cell wall, the carbolfuchsin solution applied to the specimen is normally heated to evaporation point. If the Kinyoun carbolfuchsin solution is used, the heating of the solution is dispensable. Consequently, the release of hazardous phenolic vapors will be avoided.
Once the AFB have absorbed the fuchsin dye, it is virtually impossible to decolorize them again, even when they are intensively treated with a decolorizing solution such as e. g. hydrochloric acid in ethanol. Accordingly, AFB are termed as acid- and alcohol-fast for staining, and are stained red in the microscopic visualization. Correspondingly, all non-acid-fast microorganisms are counterstained with an appropriate dye.
Pretreatment of the specimens with Sputofluol™ dissolves the bacteria from the surrounding viscid sputum and cell material. Sputofluol™ also has a disinfectant effect, with the result that any microorganisms that are present are killed off.
As Certistain® dye it is chemically quality-certified according to highest standards and strict specifications.
Aplicação
Nota de análise
Identity (UV/VIS-Spectrum): passes test
Absorption maximum λ max (ethanol 50 %): 553 - 556 nm
Spec. Absorptivity A 1%/1cm (λ<SUB>m</SUB><SUB>a</SUB><SUB>x</SUB>; 0.003 g/l; ethanol 50 %): 1810 - 2430
TLC-Test: passes test
Loss on drying (110 °C): ≤ 10 %
Suitability for microscopy: passes test
Informações legais
Palavra indicadora
Danger
Frases de perigo
Declarações de precaução
Classificações de perigo
Aquatic Acute 1 - Aquatic Chronic 1 - Carc. 1B - Eye Irrit. 2 - Skin Irrit. 2 - STOT SE 3
Órgãos-alvo
Respiratory system
Código de classe de armazenamento
6.1C - Combustible, acute toxic Cat.3 / toxic compounds or compounds which causing chronic effects
Classe de risco de água (WGK)
WGK 3
Certificados de análise (COA)
Busque Certificados de análise (COA) digitando o Número do Lote do produto. Os números de lote e remessa podem ser encontrados no rótulo de um produto após a palavra “Lot” ou “Batch”.
Já possui este produto?
Encontre a documentação dos produtos que você adquiriu recentemente na biblioteca de documentos.
Nossa equipe de cientistas tem experiência em todas as áreas de pesquisa, incluindo Life Sciences, ciência de materiais, síntese química, cromatografia, química analítica e muitas outras.
Entre em contato com a assistência técnica