CLS13951L

Pyrex^® round media storage bottles and reusable screw caps

capacity 1,000 mL

• Sinônimo(s): Pyrex^® media bottles, bottle, glass media bottles, laboratory bottles, media bottle, pyrex bottle, round bottles
• Código UNSPSC: 41121800
• NACRES: NB.43

Propriedades

• Materiais: borosilicate glass bottle; clear bottle; cylindrical bottle; orange polypropylene cap (plug seal); wide-mouth bottle
• esterilidade: non-sterile
• Características: autoclavable; cap; graduations; reusable
• embalagem: case of 10
• fabricante/nome comercial: Corning 1395-1L
• disponibilidade: not available in EU
• capacidade: 1,000 mL
• diâmetro × A: 101 mm × 225 mm
• conector: GL 45 neck thread

Descrição

Descrição geral

These heavy duty 1 L PYREX round bottles can be used for storage as well as mixing and sampling. They include a linerless, one-piece autoclavable orange polypropylene plug seal GL45 threaded cap with a drip-free pouring ring. New glass bead indicates full capacity line. Bottles have permanent white enamel graduations and marking spots.

Caution: DO NOT tighten caps immediately after autoclaving as the vacuum resulting from cooling can cause breakage. -A wide range of optional caps are available for these bottles: -Polypropylene colored caps in a choice of orange, green, purple, red, and light gray for ease of sorting and identification. -Vented membrane cap with 022 μm PTFE hydrophobic membrane. -Red PBT (polybutylene terephthalate) solid caps and ETFE pouring rings for dry heat sterilization (180°C). -PBT caps with silicone septa for syringe sampling or introduction of reagents.

Pyrex heavy-duty round media storage bottles can be used for storage as well as for mixing and sampling. These media storage bottles Include linerless, one-piece, autoclavable, orange PP plug-seal caps with drip-free pouring rings. Optional red PBTP caps and red ETFE pouring rings are available separately, for dry heat sterilization (180°C).

Pyrex round media storage bottles are made of borosilicate glass with permanent, white enamel graduations and marking spots.

Caution: Bottles larger than 2 L should NOT be used with bottle-top filter units or in other applications involving vacuum/pressure, as breakage may occur. DO NOT tighten caps immediately after autoclaving as the vacuum resulting from cooling can cause breakage.

A wide range of optional caps are available for these bottles:

• Vented membrane cap with 0.22 μm PTFE hydrophobic membrane
• Red PBT (polybutylene terephthalate) solid caps and ETFE pouring rings for dry heat sterilization (180°C)
• PBT caps with silicone septa for syringe sampling or introduction of reagents

Informações legais

PYREX is a registered trademark of Corning, Inc.