Alpha-terpineol can be used for dilution, as it is a component of this product. However, no specific method or protocol for dilution is available.
735825
Silver
conductive paste
Sinônimo(s):
Silver Paste DGP80 TESM8020
Faça loginpara ver os preços organizacionais e de contrato
Selecione um tamanho
25 G
R$ 1.969,00
Selecione um tamanho
Alterar visualização
25 G
R$ 1.969,00
About This Item
Fórmula linear:
Ag
Número CAS:
Peso molecular:
107.87
Número MDL:
Código UNSPSC:
12352103
ID de substância PubChem:
NACRES:
NA.23
Produtos recomendados
Nível de qualidade
Formulário
paste (microparticles)
características do produto alternativo mais ecológico
Design for Energy Efficiency
Learn more about the Principles of Green Chemistry.
sustainability
Greener Alternative Product
concentração
≥75%
resistividade
1-3 * 10^-5 Ω-cm (conductive paste)
1.59 μΩ-cm, 20°C
Matriz
α-Terpineol
tamanho de partícula
200 nm (80%)
<5 nm (20%)
viscosidade
100,000-300,000 cP, 0.4 rpm(25 °C, Brookfield)
p.e.
2212 °C (lit.)
pf
960 °C (lit.)
temperatura de transição
curing temperature 120-150 °C (30-60 min)
densidade
10.49 g/cm3 (lit.)
categoria alternativa mais ecológica
, Enabling
temperatura de armazenamento
2-8°C
cadeia de caracteres SMILES
[Ag]
InChI
1S/Ag
chave InChI
BQCADISMDOOEFD-UHFFFAOYSA-N
Descrição geral
Dispersion
Recommended washing solvent = polar solvent (Ethanol, IPA, Methanol, etc)
Recommended substrates = ITO film & glass, plastic film
Recommended washing solvent = polar solvent (Ethanol, IPA, Methanol, etc)
Recommended substrates = ITO film & glass, plastic film
We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product belongs to Enabling category of greener alternatives thus aligns with "Design for energy efficency". 3D printable inks help to design and print more complex designs with minimum waste and it is environmentally friendly. Click here for more information.
Aplicação
Silver conductive paste (Ag) can be used as an adhesive which can be used on indium tin oxide (ITO) for a variety of electronic applications.[1][2] It can also be used as an interdigitated electrode (IDE) for gas sensors.[3][4]
This product can be used in material extrusion 3D printing technique.
Informações legais
Product of ANP, Inc.
Palavra indicadora
Danger
Frases de perigo
Declarações de precaução
Classificações de perigo
Aquatic Acute 1 - Aquatic Chronic 1 - Eye Dam. 1 - Skin Irrit. 2
Código de classe de armazenamento
11 - Combustible Solids
Classe de risco de água (WGK)
WGK 3
Ponto de fulgor (°F)
205.0 °F
Ponto de fulgor (°C)
96.1 °C
Escolha uma das versões mais recentes:
Já possui este produto?
Encontre a documentação dos produtos que você adquiriu recentemente na biblioteca de documentos.
Os clientes também visualizaram
Optimization of physical properties of vacuum evaporated CdTe thin films with the application of thermal treatment for solar cells
Chander S and Dhaka MS
Materials Science in Semiconductor Processing, 40, 708-712 (2015)
Physical properties of vacuum evaporated CdTe thin films with post-deposition thermal annealing
Chander S and Dhaka MS
Physica E: Low-Dimensional Systems and Nanostructures, 73, 35-39 (2015)
Structural transformations of mechanically alloyed polycrystalline YMnO 3-based material for gas sensing application
Abdullah NH, et al.
Journal of the Australasian Ceramic Society, 18(8), 1-12 (2019)
A Hydrogen Gas Sensor Based on TiO2 Nanoparticles on Alumina Substrate
Mohd Chachuli S, et al.
Sensors, 18(8), 2483-2483 (2018)
T Prameela Devi et al.
Indian journal of experimental biology, 51(7), 543-547 (2013-08-01)
A total of 75 isolates belonging to five different species of Trichoderma viz., T. asperellum, T. harzianum, T. longibrachiatum, T. pseudokoningii and T. virens were screened for the production of silver nanoparticles. Although all the isolates produced nanoparticles, T. virens
Artigos
Small molecular weight organic semiconductors are promising for flexible transistor applications in next-gen soft electronics.
The diversity of applications and nanostructured materials accessible using ultrasonic spray methods are highlighted in this article.
While dye sensitization as the basis for color photography has been accepted for a very long time,1 attempts to use this principle for the conversion of solar light to electricity generally had resulted only in very low photocurrents, below 100 nA/cm
Ultrasonic spray pyrolysis produces scalable nanomaterials like metal oxides and quantum dots for diverse applications.
-
Do you have any suggestion for dilution? I want to control the viscosity. I confirmed that the dispersion matrix is alpha-terpineol. Can I use that solvent to dilute it? If so, Could you recommend the specific method? (i.e. sonication)
1 answer-
Helpful?
-
-
How is shipping temperature determined? And how is it related to the product storage temperature?
1 answer-
Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf
Helpful?
-
-
How can I determine the shelf life / expiration / retest date of this product?
1 answer-
If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdfHelpful?
-
-
Does this paste contain any silicones or siloxanes?
1 answer-
This product is ≥75% Silver. The remaining content is the α-Terpineol dispersion matrix. There are no silicone or siloxane components present.
Helpful?
-
-
what is the curing temperature of silver conducting paste ?
1 answer-
As stated in the 'PROPERTIES' section of the product page, the curing temperature is 120-150 °C for 30-60 min.
Helpful?
-
-
What is the duration for bonding two structures together when using this product? Additionally, how long does it take to solidify? Also, I need information on the duration until it is no longer conductive.
1 answer-
The duration for solidification and conductivity can vary based on factors such as substrate type and curing temperature. Additionally, we do not have any experience or test results regarding your technical inquiry
Helpful?
-
Active Filters
Nossa equipe de cientistas tem experiência em todas as áreas de pesquisa, incluindo Life Sciences, ciência de materiais, síntese química, cromatografia, química analítica e muitas outras.
Entre em contato com a assistência técnica
