Saltar al contenido
Merck
Todas las fotos(1)

Documentos clave

Ver Toda la documentación

675288

Sigma-Aldrich

PEDOT

nanoparticles, aqueous dispersion

Sinónimos:

PEDOT, Poly(2,3-dihydrothieno-1,4-dioxin)

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización

Seleccione un Tamaño

25 ML
US$ 341,00

US$ 341,00

PRECIOS SIN IMPUESTOS NACIONALES
Check Cart for Availability
Solicitar un pedido a granel
Todas las fotos(1)

Seleccione un Tamaño

Cambiar Vistas
25 ML
US$ 341,00

About This Item

Fórmula lineal:
(C6H4O2S)n
Número de CAS:
126213-51-2
Número MDL:
MFCD09753886
Código UNSPSC:
12352103
NACRES:
NA.23

US$ 341,00

PRECIOS SIN IMPUESTOS NACIONALES
Check Cart for Availability
Solicitar un pedido a granel

Nombre del producto

Poly(3,4-ethylenedioxythiophene), nanoparticles, dispersion, in H2O

Formulario

dispersion
nanoparticles

Nivel de calidad

100

contiene

dodecylbenzene sulfonic acid (DBSA) as dopant

concentración

in H2O

temp. de almacenamiento

2-8°C

Categorías relacionadas

Descripción general

Poly(3,4-ethylenedioxythiophene)(PEDOT) is a conjugating polymer that has a conductivity of 300 S/cm. It can be copolymerized with poly(styrene-sulfonic acid) to form a water soluble polymeric film with high conductivity and transparency.[1]

Aplicación

PEDOT doped with graphene oxide (GO) may be coated on carbon electrodes to fabricate electrochemical sensors for nonenzymatic sensing of glucose.[2][3] It can also be used as a conductive polymer which may act as a bridge between the electronic polymers and biomolecules for a variety of bioelectronics applications.[4]

Código de clase de almacenamiento

10 - Combustible liquids

Clase de riesgo para el agua (WGK)

WGK 2

Punto de inflamabilidad (°F)

Not applicable

Punto de inflamabilidad (°C)

Not applicable

Equipo de protección personal

Eyeshields, Gloves, multi-purpose combination respirator cartridge (US)

Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number
MKCV0738
MKCQ7777
MKCM6901
MKCK5252
MKCD1135

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

Busque por un COA

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Nickel nanoparticles modified conducting polymer composite of reduced graphene oxide doped poly (3, 4-ethylenedioxythiophene) for enhanced nonenzymatic glucose sensing.
Hui Ni, et al.
Sensors and Actuators B, Chemical, 221(4), 606-613 (2015)
Poly (3, 4-ethylenedioxythiophene)(PEDOT) derivatives: Innovative conductive polymers for bioelectronics.
Mantione D, et al.
Polymer, 9(8), 354-354 (2017)
Graphene oxide doped poly (3, 4-ethylenedioxythiophene) modified with copper nanoparticles for high performance nonenzymatic sensing of glucose.
Hui Ni, et al.
Journal of Material Chemistry B: Materials for Biology and Medicine, 3(4), 556-561 (2015)
Poly (3, 4-ethylenedioxythiophene) and its derivatives: past, present, and future.
Groenendaal L, et al.
Advanced Materials, 12(7), 481-494 (2000)

Artículos

Conjugated Polymers for the Engineering of Device/Tissue Interface

Conjugated polymers offer charge transport between inorganic, electrically conducting metals and organic, proton-conducting biological systems.

Flexible and Printed Organic Thermoelectrics: Opportunities and Challenges

Progress in Organic Thermoelectric Materials & Devices including high ZT values of >0.2 at room temperature by p-type (PEDOT:PSS) & n-type (Poly[Kx(Ni-ett)]) materials are discussed.

Organic Bioelectronic Materials and Devices for Bridging Biology and Traditional Electronics

Professor Rivnay (Northwestern University, USA) discusses using organic mixed conductors as an alternative to efficiently bridge the ionic world of biology with contemporary microelectronics.

Conducting Polymer Device Applications

The application of conducting polymers at the interface with biology is an exciting new trend in organic electronics research.

Questions

1–3 of 3 Questions  

  1. How can I determine the shelf life / expiration / retest date of this product?

    1 answer

    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdf

      Helpful?

  2. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 answer

    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      Helpful?

  3. What's the estimated concentration of the PEDOT nanoparticles (675288-25ML)? The present batch of this suspension seems much more transparent than a diluted one (~ 0.5 wt% PEDOT in H2O) from a previous bottle I ordered before. I noticed the COA changed.

    1 answer

    1. The dispersion's concentration, per the supplier, is 1% weight/volume.

      Helpful?

Reviews

No rating value

Active Filters

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico