This item is intended for research use only and is not suitable as food grade or FCC material. Currently, there is no product option available that meets this requirement.
Y1250
Yeast Nitrogen Base With Amino Acids
Non-selective yeast growth medium
Sinónimos:
ynb with amino acids
Seleccione un Tamaño
Seleccione un Tamaño
About This Item
Productos recomendados
grado
Molecular Biology
for molecular biology
Nivel de calidad
esterilidad
non-sterile
Formulario
powder
técnicas
microbiological culture: suitable
pH
5.3-5.5(0.67% solution)
aplicaciones
microbiology
temp. de almacenamiento
room temp
idoneidad
nonselective for Candida spp.
nonselective for Pichia spp.
nonselective for Saccharomyces spp.
nonselective for Zygosaccharomyces spp.
Categorías relacionadas
Descripción general
Aplicación
- in the ZYP-31 media preparation for E.coli[1]
- in synthetic dextrose (SD) medium to evaluate the influence of nitrogen source[2]
- to culture Candida utilis for the production of 13C-labeled yeast extract as internal standard[3]
- in the preparation of imaging medium[4]
Suitable for use in classifying yeasts based on carbon requirements. Also suitable for general growth of yeasts with the addition of a carbon source (usually glucose).Yeast nitrogen base with amino acids is a satisfactory nitrogen source for general growth media. Contains all essential nutrients required for the growth of yeasts except carbohydrate.
Componentes
Nitrogen Sources:
Ammonium sulfate, 5.0 g/L
Amino Acids:
L-histidine, 10 mg/L
DL-methionine, 20 mg/L
DL-tryptophan, 20 mg/L
Vitamins:
Biotin, 2.0
Calcium pantothenate, 400
Folic acid, 2.0
Inositol, 2.0 mg/L
Nicotinic acid, 400
p-Aminobenzoic acid, 200
Pyridoxine HCl, 400
Riboflavin, 200
Thiamine HCL, 400
Trace Elements:
Boric acid
Copper sulfate
Potassium iodide
Ferric chloride
Magnesium sulfate
Sodium molybdate
Zinc sulfate
Salts:
Potassium phosphate monobasic, 1.0 g/L
Magnesium sulfate, 0.5 g/L
Sodium chloride, 0.1 g/L
Calcium chloride, 0.1 g/L
Reconstitución
Dilute the 10x concentrated stock to a 1x working solution by adding 100mL concentrated stock to 900mL sterile water.
Producto relacionado
Código de clase de almacenamiento
11 - Combustible Solids
Clase de riesgo para el agua (WGK)
WGK 3
Punto de inflamabilidad (°F)
Not applicable
Punto de inflamabilidad (°C)
Not applicable
Equipo de protección personal
Eyeshields, Gloves, type N95 (US)
Elija entre una de las versiones más recientes:
Certificados de análisis (COA)
¿No ve la versión correcta?
Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
Los clientes también vieron
Protocolos
Yeast culture techniques: Model systems for eukaryotic studies with liquid media or agar plate growth.
-
Is the Yeast nitrogen base with amino acids food grade or FCC
1 answer-
Helpful?
-
-
Is there a technical data sheet avaliable for product Y1250? I would like to know the concentrations of trace elements.
1 answer-
The concentration of the trace elements is not reported on the datasheet. The trace elements in the formulation are as follows:
- Boric Acid: 500.0µg
- Potassium Iodide: 100.0µg
- Manganese Sulfate: 400.0µg
- Zinc Sulfate: 0.4mg
- Calcium Chloride: 0.1g
- Copper Sulfate: 40.0µg
- Ferric Chloride: 200.0µgHelpful?
-
-
Hi, Is this product Kosher and Halal certified? And food grade? Y1250 - Sigma-Aldrich Yeast Nitrogen Base With Amino Acids Kr, Benedicte
1 answer-
This product is intended for research use only and is not to be used for any other purpose, which includes but is not limited to, unauthorized commercial uses, in vitro diagnostic uses, ex vivo or in vivo therapeutic uses, or any type of consumption or application to humans or animals. Currently, a food-grade product is not offered.
Helpful?
-
Active Filters
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico