跳轉至內容
Merck
全部照片(1)

重要文件

24633

Supelco

带有Thermogreen® LB-2胶垫的1L Tedlar® PLV气体采样袋

Push/Pull Lock Valve (PLV)

同義詞:

Tedlar® 气体采样袋

登入查看組織和合約定價
全部照片(1)

About This Item

分類程式碼代碼:
41104008
暫時無法取得訂價和供貨情況

材料

Tedlar® PVDF film

品質等級

100

agency

suitable for ASTM® D5504 (Sulfur Compounds in Natural Gas and Fuels by GC)
suitable for EPA 18 (Gaseous Organic Compounds; VOCs by GC)
suitable for EPA 40,TO-3,TO-15 (Volatile Organic Compounds (VOCs))
suitable for EPA TO-12 (Non-Methane Organic Compounds (NMOC))
suitable for EPA TO-14A (Volatile Organic Compounds (VOCs) by GC/MS)
suitable for NIOSH 3704 (Perchloroethylene)

描述

septum type: yes; Thermogreen® LB-2

包裝

pkg of 10 bags

技術

whole air sampling: suitable

寬度 × 長度

7 in. × 9 in.

最大體積

1 L

應用

air monitoring
environmental
industrial hygiene

相容性

for use with Calibration mixes - gas phase standards/gas mixtures

尋找類似的產品？ 前往 產品比較指南

相關類別

一般說明

Tedlar已被推荐用于US EPA的几种方法中，用于对VOC和硫化合物的取样。我们的Tedlar产品采用优质2 mil Tedlar薄膜制成，具有出色的惰性/不渗透性/样品完整性和良好的回收率数据。我们的推锁阀（PLV）和接缝密封工艺确保这些袋子牢固且防漏，即使在最苛刻的取样和运输条件下也是如此。

應用

在确定胂的大气稳定性时，Tedlar袋可用于容纳含有胂的空气。[1]

法律資訊

ASTM is a registered trademark of American Society for Testing and Materials
Tedlar is a registered trademark of E. I. du Pont de Nemours and Company
Thermogreen is a registered trademark of Merck KGaA, Darmstadt, Germany

從最近期的版本中選擇一個：

分析證明 (COA)

Lot/Batch Number

It looks like we've run into a problem, but you can still download Certificates of Analysis from our 文件 section.

如果您需要協助，請聯絡 客戶支援

已經擁有該產品？

您可以在文件庫中找到最近購買的產品相關文件。

存取文件庫

Atmospheric stability of arsines and the determination of their oxidative products in atmospheric aerosols (PM 10): evidence of the widespread phenomena of biovolatilization of arsenic.
Jakob R
Journal of Environmental Monitoring, 12 (2), 409-416 (2010)
A Enel et al.
Lab on a chip, 20(7), 1290-1297 (2020-03-12)
Digital microfluidics is known for fine manipulation of sub-millimeter samples, with applications from biological sample preparation to diagnostic testing. Unfortunately, until now, it has been only limited to liquid phases. In this paper, we present a new system based on
Alveolar sampling and fast kinetics of tetrachloroethene in man. I. Alveolar sampling.
Opdam JJ and Smolders F.
British Journal of Industrial Medicine, 43 (12), 814-824 (1986)

相關內容

空氣監測

空氣監測用於測量環境、工業或室內環境中的空氣污染物水平，以根據健康和監管機構制定的標準評估空氣品質。

Air Monitoring

Air monitoring is used to measure the level of air pollutants in environmental, industrial, or indoor settings to assess the air quality per standards established by health and regulatory agencies.

Questions

1–9 of 9 Questions  

  1. How can I determine the shelf life / expiration / retest date of this product?

    1 answer

    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdf

      Helpful?

  2. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 answer

    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      Helpful?

  3. About TedlarGasSamplingBag(1L), do you have appropriate PVC tube (3/16" ID) or any kind of tube to connect the bag to sampling point? General one is very slightly wider than nozzle on it.

    1 answer

    1. The PVC laboratory tubing that has an (I.D.) of 3/16" is Product Z280364-1PAK. However, it must be noted that the polypropylene valve stem is 3/16" in outside diameter (O.D.) which means that the recommended tubing must have 1/4" (I.D.) which is Product Z280372-1PAK.

      Helpful?

  4. For 24633 product, what is the maximum temperature and pressure the bag can withstand? and is it in transparent form?

    1 answer

    1. Tedlar® films are rated for continuous use from -72°C to 107°C (-98°F to 225°F). This Tedlar® PVDF film is transparent. The Tedlar film has a tensile strength of 8000 psi while the recommended fill pressure is 17.7 psi. The maximum fill volume should be limited to 75 - 80 % to allow for pressure changes.

      Helpful?

  5. Is there any recommendation regarding how often the septum can be pierced with a needle for removal of gas, until the septum loses its integrity?

    1 answer

    1. The septum is located at the base flange of the valve with the bag film below. The septum does not come into contact with the sample. The septum allows repeated punctures with syringes without leakage. The number of times the fluoropolymer septum may be punctured before it loses its integrity had not been determined. A small guage needle should assure maximum life of the septum.

      Helpful?

  6. How full can I fill a Tedlar bag, Product 24633, Tedlar® Gas Sampling Bag?

    1 answer

    1. Flush the Tedlar bag several times with nitrogen prior to use. We recommend filling the bag to approximately 80% of capacity.

      Helpful?

  7. What is Tedlar, as used in the description of Product 24633, Tedlar® Gas Sampling Bag?

    1 answer

    1. Tedlar is a polyvinyl fluoride (PVF) film manufactured by DuPont that has excellent resistance to chemicals.

      Helpful?

  8. What is the Department of Transportation shipping information for this product?

    1 answer

    1. Transportation information can be found in Section 14 of the product's (M)SDS.To access the shipping information for this material, use the link on the product detail page for the product.

      Helpful?

  9. What size of tubing can I use with Product 24633, Tedlar® Gas Sampling Bag?

    1 answer

    1. The polypropylene valve stem is 3/16 inch outside diameter (o.d.) making it suitable for use with most 1/4 inch o.d. tubing.

      Helpful?

Reviews

No rating value

Active Filters

我們的科學家團隊在所有研究領域都有豐富的經驗，包括生命科學、材料科學、化學合成、色譜、分析等.

聯絡技術服務