Unfortunately a photo of this product is not available. This membrane has a molecular weight cut-off of 14 kDa. As mentioned in the DESCRIPTION section under ' Preparation Note', it is recommended to remove glycerol by washing the tubing in running water for 3-4 hours. Removal of sulfur compounds can be accomplished by treating the tubing with a 0.3% (w/v) solution of sodium sulfide at 80°C for 1 minute. Wash with hot water (60°C) for 2 minutes, followed by acidification with a 0.2% (v/v) solution of sulfuric acid, then rinse with hot water to remove the acid. This tubing will retain most proteins of molecular weight 12,000 or greater.
推薦產品
平均直徑
6 mm , when full
平均平面寬度
10 mm (0.4 in.)
容量
~10 mL/ft
尋找類似的產品? 前往 產品比較指南
一般說明
包裝
品質
準備報告
儲存類別代碼
11 - Combustible Solids
水污染物質分類(WGK)
WGK 3
閃點(°F)
Not applicable
閃點(°C)
Not applicable
客戶也查看了
相關內容
Removal of Ethidium Bromide from DNA by Extraction with Organic Solvents Protocol from Cold Spring Harbor Laboratory Press.
Dialysis Tubing
透析膜管
-
Hello, could I receive more details about this product, including a picture? Is the MWCO 14 kDa? do they need a pre-treatment before use?
1 answer-
Helpful?
-
-
What is the wall thickness of Product D9277, 10 mm (flat width) dialysis tubing?
1 answer-
The nominal dry wall thickness for Product D9277, 10 mm (flat width) dialysis tubing, is 51 micrometers.
Helpful?
-
-
What is the Department of Transportation shipping information for this product?
1 answer-
Transportation information can be found in Section 14 of the product's (M)SDS.To access the shipping information for this material, use the link on the product detail page for the product.
Helpful?
-
Active Filters
我們的科學家團隊在所有研究領域都有豐富的經驗,包括生命科學、材料科學、化學合成、色譜、分析等.
聯絡技術服務