PCC300C30E

Pellicon^®胶囊，带Ultracel^®膜

C Screen, 3 m² manifold extender AseptiQuik^® L connectors

• 同義詞: Pellicon^® Capsule with Ultracel^® Membrane
• 分類程式碼代碼: 23151806

屬性

• 材料: EPDM rubber seal; PPO/PS blend (core; core); PPO/PS blend housing; TPE seal; composite regenerated cellulose (CRC) membrane; epoxy adhesive; polyester screen; polypropylene seal; polyurethane adhesive
• 品質等級: 400
• 無菌: sterile; γ-irradiated
• 產品線: Pellicon^®
• 特點: holdup volume 1290 mL (in feed channel); holdup volume 1872 mL (in permeate channel)
• 包裝: package of 1
• 參數: max. inlet pressure at 60 psi (4.1 bar) and 4-30 °C; max. transmembrane pressure at 45 psi (3.1 bar) and 4-30 °C; 4-6 L/min-m² flow rate
• 技術: ultrafiltration: suitable
• 過濾面積: 3 m²
• 螢幕尺寸: , Type C screen (coarse screen)
• 尺寸: 45.9 cm (18.1 in.) , Length; 46.9 cm (18.5 in.) , Height
• 寬度: 48.2 cm (19.0 in.) ; 482 mm
• 雜質: ≤5 ppm Meets TOC (in retentate effluent, after a WFI flush of 20 L/m²)
• 基質: Ultracel^®
• 孔徑: 300 kDa
• pH值範圍: 2-13
• 儲存溫度: 15-25°C

描述

一般說明

The Pellicon^® Capsule is the first of its kind -- a true single-use TFF device that comes ready to process in minutes. Self-contained, it employs an easy-to-use, holderless format and is supplied sterilized by irradiation.

Feed: AseptiQuik^® L Connector

Permeate: AseptiQuik^® L Connector

Retentate: AseptiQuik^® L Connector
Permeate: AseptiQuik^® G Connector

應用

Viral Gene Therapies, Vaccines, Concentration, Diafiltration, Buffer exchange, Protein purification, mRNA

特點和優勢

• Plug ′n play, holderless design - easy to install, safe to remove
• Gamma Sterilized and preseravtive-free - ready to process in minutes
• True single-use, self-contained capusle - fast, safe, and flexible batch turnaround
• Proven Ultracel^® membrane and C screen - high recovery, superior mass transfer, solvent resistance
• Pellicon^® TFF proven performance - true linear scalability within Pellicon^® TFF families

包裝

The manifold assembly is inserted into a polyethylene foam frame and then double bagged and vacuum sealed. The double-bagged assembly is placed within a second foam frame and individually boxed (qty 1 per box). Packaged assemblies are palletized.

其他說明

The Emprove^® Program complements the product portfolio through

• Comprehensive documentation to support qualification, risk assessment and process optimization needs.
• Consolidation of product specific testing, quality and regulatory information to simplify compliance requirements.
• Convenient 24/7 access to up-to-date product information.

法律資訊

AseptiQuik is a registered trademark of Colder Products Company

Emprove is a registered trademark of Merck KGaA, Darmstadt, Germany

Pellicon is a registered trademark of Merck KGaA, Darmstadt, Germany

ULTRACEL is a registered trademark of Merck KGaA, Darmstadt, Germany