推薦產品
材料
polyester support
polyethersulfone
polypropylene
polypropylene housing
polypropylene vent cap
polysulfone
silicone seal
品質等級
法律遵循
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
無菌
non-sterile
滅菌相容性
gamma compatible
產品線
Opticap® XLT 10
特點
hydrophilic
製造商/商標名
Millipore Express®
參數
≤56.4 mL/min air diffusion at 2.75 bar (40 psig) and 23 °C (in water)
1.0 bar max. differential pressure (15 psi) at 80 °C (Forward)
2.1 bar max. differential pressure (30 psi) at 25 °C (Reverse; intermittent)
25 °C max. inlet temp.
5.5 bar max. differential pressure (80 psi) at 25 °C (Forward)
6.9 bar max. differential pressure (100 psi) at 25 °C (Forward; intermittent)
80 psig max. inlet pressure
技術
sterile filtration: suitable
長度
37.6 cm (14.8 in.)
寬度
4.2 in.
柱標稱長度
10 in. (25 cm)
直徑
10.7 in. (4.2 cm)
過濾面積
1.0 m2
入口到出口寬度
17.5 cm (6.9 in.)
出口接頭直徑
1 in.
雜質
≤0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
基質
Millipore Express® SHC High Area
pore size
0.5/0.2 μm pore size
起泡點
≥4000 mbar (58 psig), air with water at 23 °C
接頭
1/4 in. drain/vent hose barb (with double O-ring seal)
inlet sanitary flange
outlet hose barb
(38 mm (1 1/2 in.) Sanitary Flange Inlet and 25 mm (1 in.) Hose Barb Outlet)
應用
sample preparation
一般說明
包裝
其他說明
準備報告
Gamma compatible to 45 kGy; 3 autoclave cycles of 60 min @ 123 °C; not in-line steam sterilizable
分析報告
Quantitative retention of 107 CFU/cm2Brevundimonas diminuta (ATCC® 19146) per HIMA methodology
After sterilization and a controlled water flush of 21 L, samples exhibited less than 500 ppb TOC per USP <64> and less than 1.3 µS/cm per USP <64> at 25 °C.
法律資訊
免責聲明
未找到適合的產品?
試用我們的產品選擇工具.
分析證明 (COA)
輸入產品批次/批號來搜索 分析證明 (COA)。在產品’s標籤上找到批次和批號,寫有 ‘Lot’或‘Batch’.。
我們的科學家團隊在所有研究領域都有豐富的經驗,包括生命科學、材料科學、化學合成、色譜、分析等.
聯絡技術服務