推薦產品
材料
PTFE membrane
gridded filter
white filter
特點
hydrophobic
製造商／商標名
Fluoropore®
參數
122 mL/min-cm2 water flow rate
130 °C max. temp.
6 L/min-cm2 air flow rate
過濾器直徑
25 mm
過濾器厚度
150 μm
孔徑
5.0 μm pore size
85 % porosity
起泡點
≥0.48 bar, air with water at 23 °C
尋找類似的產品？ 前往 產品比較指南
一般說明
Unlike fibrous filter media that trap particles in their matrix, Fluoropore® (hydrophobic PTFE) membranes collect particles on their surface, which make them ideal candidates for use in airborne particle monitoring applications. This surface collection provides better detection efficiencies and lower FWHM measurements. (FWHM is defined as the full width at half of the maximum height of the P0-218 peak obtained during sampling of room air.)
Choice of Pore Sizes:
Fluoropore membranes are available in 3 μm (FSLW) and 5 μm (FMLW) pore sizes - the smaller pore size provides low FWHM; the larger pore size has very low pressure drop and greater throughput capacity, which minimizes the number of filter changeouts.
Contrasting Backing Material:
The white backing of our FMLW filter is gridded to assist in identifying membrane orientation for the correct installation into sampling devices.
Choice of Pore Sizes:
Fluoropore membranes are available in 3 μm (FSLW) and 5 μm (FMLW) pore sizes - the smaller pore size provides low FWHM; the larger pore size has very low pressure drop and greater throughput capacity, which minimizes the number of filter changeouts.
Contrasting Backing Material:
The white backing of our FMLW filter is gridded to assist in identifying membrane orientation for the correct installation into sampling devices.
特點和優勢
- High collection efficiency
- Extremely low pressure drop
- Higher throughput capacity
- Black backing ensures proper orientation
法律資訊
Fluoropore is a registered trademark of Merck KGaA, Darmstadt, Germany
分析證明 (COA)
輸入產品批次/批號來搜索 分析證明 (COA)。在產品’s標籤上找到批次和批號，寫有 ‘Lot’或‘Batch’.。
我們的科學家團隊在所有研究領域都有豐富的經驗，包括生命科學、材料科學、化學合成、色譜、分析等.
聯絡技術服務