推薦產品
ligand
carboxymethyl
品質等級
描述
weak cation exchanger, suspension in 20% ethanol and 150 mM NaCl (40-90 µm)
無菌
sterile (Caustic Stable)
產品線
Fractogel®
形狀
resin
特定分析物
MAbs
參數
300 cm/hr flow rate
8 bar max. pressure
基質活性組
methacrylate
平均粒徑
40-90 μm
容量
100 mg binding capacity (lysozyme/ml of resin)
轉變溫度
flash point 35 °C (calculated)
密度
1.43 g/cm3 at 20 °C
應用
recombinant protein
vaccine development
分離技術
cation exchange
weak cation exchange
儲存溫度
2-30°C
尋找類似的產品? 前往 產品比較指南
一般說明
Weak cation exchange Fractogel® resin featuring the tentacle technology, efficient for difficult aggregate removal
特點和優勢
Fractogel® EMD COO- (M) enables:
Due to the titration behavior, the ion exchange capacity can be used from pH 6 to pH 12. The separation of proteins is based on reversible electrostatic interactions between the negatively charged regions of the proteins′ surface and the support. Proteins are retained efficiently on Fractogel® EMD COO- (M) when the pH of the buffer is about 1 unit below their isoelectric points (pl).
The strength of the binding depends on the following:
- Good resolution between monomers and aggregates
- Efficient aggregate and HCP removal combined with high yield
- Compatibility with 2.5 % (v/v) aqueous benzyl alcohol containing 150 mM NaCl storage solution
Due to the titration behavior, the ion exchange capacity can be used from pH 6 to pH 12. The separation of proteins is based on reversible electrostatic interactions between the negatively charged regions of the proteins′ surface and the support. Proteins are retained efficiently on Fractogel® EMD COO- (M) when the pH of the buffer is about 1 unit below their isoelectric points (pl).
The strength of the binding depends on the following:
- the buffer system
- pH value of the buffer which determines the surface charge of the protein
- the degree of the ionization of the functional groups of the exchanger
- the concentration of the counter ions
- the charge density on the support (protein binding capacity)
包裝
- 1.16886.0100: Fractogel® EMD COO- (M) Resin 100ml
- 1.16886.0010: Fractogel® EMD COO- (M) Resin 10ml
- 1.16886.0500: Fractogel® EMD COO- (M) Resin 500ml
- 1.16886.5000: Fractogel® EMD COO- (M) Resin 5L
Plastic bottle
分析報告
Appearance: Milky turbid suspension,free from impurities(foreign particles)
Microscopic evaluation: Uniform spherical particles,no agglomerates,no fines
Extractable matter (water): ≤ 0.05 %
Cerium: ≤ 10 µg/g
Pressure drop(column: ID=1.6 cm, L=10 cm at 5 ml/min): ≤ 1.0 bar
Particle size (d10): 37 - 45 µm
Particle size (d50): 48 - 60 µm
Particle size (d90): 63 - 77 µm
Colony forming units (TAMC + TYMC): ≤ 100 CFU/ml
Endotoxins: ≤ 1.00 EU/ml
Protein binding capacity (lysozyme): 80 - 120 mg/ml
Functional test (b:a): ≤ 0.30
Functional test (c:d): ≤ 0.70
Functional test: Separation of chymotrypsinogen A, cytochrome C and lysozyme
Microscopic evaluation: Uniform spherical particles,no agglomerates,no fines
Extractable matter (water): ≤ 0.05 %
Cerium: ≤ 10 µg/g
Pressure drop(column: ID=1.6 cm, L=10 cm at 5 ml/min): ≤ 1.0 bar
Particle size (d10): 37 - 45 µm
Particle size (d50): 48 - 60 µm
Particle size (d90): 63 - 77 µm
Colony forming units (TAMC + TYMC): ≤ 100 CFU/ml
Endotoxins: ≤ 1.00 EU/ml
Protein binding capacity (lysozyme): 80 - 120 mg/ml
Functional test (b:a): ≤ 0.30
Functional test (c:d): ≤ 0.70
Functional test: Separation of chymotrypsinogen A, cytochrome C and lysozyme
法律資訊
FRACTOGEL is a registered trademark of Merck KGaA, Darmstadt, Germany
Not finding the right product?
Try our 產品選擇工具.
訊號詞
Warning
危險聲明
危險分類
Flam. Liq. 3
儲存類別代碼
3 - Flammable liquids
水污染物質分類(WGK)
WGK 1
閃點(°F)
95.0 °F
閃點(°C)
35 °C
分析證明 (COA)
輸入產品批次/批號來搜索 分析證明 (COA)。在產品’s標籤上找到批次和批號,寫有 ‘Lot’或‘Batch’.。
我們的科學家團隊在所有研究領域都有豐富的經驗,包括生命科學、材料科學、化學合成、色譜、分析等.
聯絡技術服務