03-0204-00

SMC^® Human IgM High Sensitivity Immunoassay Kit

1 kit sufficient for 96 wells

• 同義詞: IgM Single Molecule Counting Kit, IgM ultra-sensitive immunoassay, Immunoglobulin M immunoassay kit
• 分類程式碼代碼: 12161503
• NACRES: NA.84

屬性

• 品質等級: 200
• 用途: kit sufficient for 96 wells
• 物種活性: human
• 製造商／商標名: SMC^®
• assay range: accuracy: 70-130%; (minimum of 5 samples spiked); inter-assay cv: 12%; intra-assay cv: 7%
• 技術: ELISA: suitable; single molecule counting: suitable
• 相容性: for use with SMCxPRO^® and Erenna (validated)
• 運輸包裝: wet ice
• 儲存溫度: 2-8°C

描述

一般說明

The Single Molecule Counting (SMC^® Human IgM High Sensitivity Immunoassay uses a quantitative fluorescent sandwich immunoassay technique to measure IgM in human serum and plasma samples. The user coats a capture antibody specific for human IgM onto a 96-well microplate. After blocking the plate, the user pipettes standards and samples into the coated microplate wells. During incubation, the IgM present in the sample binds to the capture antibody on the coated plate. Unbound molecules are washed away during a wash step. The fluor-labeled detection antibody is added to each well and incubated. The detection antibody recognizes and binds to IgM that has been captured onto the plate, thus completing the immunosanwich. Following the final wash step, elution buffer is added and incubated. The elution buffer dissociates the bound protein sandwich from the plate surface, releasing the labeled antibodies. These antibodies are separated during transfer to a final microplate. The reading plate is loaded onto the Erenna or SMCxPRO^® System where the labeled molecules are detected and counted. The number of fluor-labeled detection antibodies counted is directly proportional to the amount of IgM present in the sample when captured. The amount of IgM in unknown samples is interpolated from a standard curve.

The SMC^® Human IgM High Sensitivity Immunoassay Kit contains all reagents required to perform the assays. This assay takes advantage of a standard immunoassay workflow configured in a standard plate format. Assay protocols are similar to existing sandwich ELISA methods with two key differences: 1) Elution buffer disrupts the sandwich, separating the labeled detection antibody for quantification. 2) The SMC^®immunoassay system detects analytes using Single Molecule Counting (SMC^®) technology.

特異性

This assay does not show cross-reactivity against immunoglobulin subclasses IgA, IgD, IdE, IgG1, IgG2, IgG3, or IgG4 from in-house testing

應用

The Single Molecule Counting (SMC^®) technology gives the SMC^® Human IgM High Sensitivity Immunoassay Kit offers researchers the ability to successfully overcome sample matrix challenges when accurately quantifying human IgM in serum and plasma samples

包裝

96 well assay

成分

• Assay Plate
• Coating Buffer
• Blocking Buffer
• Standard Diluent
• IgM Detection Antibody
• IgM Standard
• SMC^® Human IgM Immunoassay Kit Instructions
• 10X Wash Buffer
• Buffer C
• Elution Buffer B
• Buffer 3
• IgM Coating Antibody

法律資訊

SMC is a registered trademark of Singulex

SMCxPRO is a registered trademark of Merck KGaA, Darmstadt, Germany

免責聲明

Unless otherwise stated in our catalog or other company documentation accompanying the product(s), our products are intended for research use only and are not to be used for any other purpose, which includes but is not limited to, unauthorized commercial uses, in vitro diagnostic uses, ex vivo or in vivo therapeutic uses or any type of consumption or application to humans or animals.

安全資訊

• 象形圖: GHS06,GHS08
• 訊號詞: Danger
• 危險聲明: H302 + H332,H311,H319,H360FD,H412
• 防範說明: P273 - P280 - P301 + P312 - P302 + P352 + P312 - P304 + P340 + P312 - P308 + P313
• 危險分類: Acute Tox. 3 Dermal - Acute Tox. 4 Inhalation - Acute Tox. 4 Oral - Aquatic Chronic 3 - Eye Irrit. 2 - Repr. 1B
• 儲存類別代碼: 6.1C - Combustible acute toxic Cat.3 / toxic compounds or compounds which causing chronic effects