跳轉至內容
Merck
全部照片(1)

文件

907669

Sigma-Aldrich

Silver ink

75 wt%, LIFT printable

同義詞:

Ag ink, Laser induced forward transfer

登入查看組織和合約定價
全部照片(1)

About This Item

線性公式:
Ag
分類程式碼代碼:
12352103
NACRES:
NA.23

描述

Silver content : 75 wt%
Solvent : Diethylene Glycol Mono Butyl Ether (DGBE)
Surface Tension : 28 dyn/cm (Pendant Drop)

形狀

paste

粒徑

50-70 nm (by Lumisizer™)
90-120 nm (by Lumisizer™)

黏度

50,000-100,000 cP (Shear Rate: 1 s-1
250cP - 450 cP (Shear Rate: 1000 s-1))

密度

2.85-3.3

儲存溫度

15-25°C

相關類別

應用

This Ag ink product is a conductive high viscous ink based on single-crystal silver nanoparticles in an organic solvent, has been designed for LIFT (Laser Induced Forward Transfer) digital printing and laser sintering.

The ink offers:
  • Uniform and reproducible donor layer with low drying speed
  • Stable accurate jetting in different types of laser systems, wide working window of jetting parameters
  • High speed printing (20-50kHz), allowing high throughput
  • Narrow patterning on plastic and glass substrates (line width ∼50 μm, height ∼0.5 μm, spacing ∼50 μm)
  • Laser sintering of LIFT printed pattern, providing good electrical properties


Fit for:
LIFT digital printing
Additive electronic manufacturing
Printed electronics: RFID, FPD, Sensors

Laser induced forward transfer printing (LIFT) is a non-contact, nozzle-free, one step, direct laser writing process.
LIFT can operate under atmospheric conditions, is compatible with low laser fluences, allows the printing of organic and inorganic materials as well as biological elements. The printing process can take place from both liquid and solid phases. It further has a high lateral resolution only defined by the laser spot size. It is a method compatible with inorganic semiconductor sensor fabrication, OLED fabrication and bio printing.

其他說明

Resistivity (4PP): After laser sintering* ≤ 8 μΩ·cm (≤ 5 bulk) for LIFT printed line (∼1-2 μm thick) on plastic substrate
*Parameters should be optimized depending on line geometry and substrate

儲存和穩定性

Keep container tightly closed. Store at room temperature, do not heat above 60 °C and do not freeze.

法律資訊

Lumisizer is a trademark of LUM GmbH

象形圖

Exclamation markEnvironment
GHS07,GHS09

訊號詞

Warning

危險聲明

H319,H410

危險分類

Aquatic Acute 1 - Aquatic Chronic 1 - Eye Irrit. 2

儲存類別代碼

10 - Combustible liquids

水污染物質分類（WGK）

WGK 3

閃點（°F）

Not applicable

閃點（°C）

Not applicable

分析證明 (COA)

輸入產品批次/批號來搜索 分析證明 (COA)。在產品’s標籤上找到批次和批號，寫有 ‘Lot’或‘Batch’.。

已經擁有該產品？

您可以在文件庫中找到最近購買的產品相關文件。

存取文件庫

客戶也查看了

Slide 1 of 1

1 of 1

胶态银溶液 nanoparticle, 30-35 wt. % in triethylene glycol monoethyl ether, spec. resistivity 11 μΩ-cm, for printing on plastic films

Sigma-Aldrich

736465

胶态银溶液

V S Cheptsov et al.
Letters in applied microbiology, 67(6), 544-549 (2018-09-18)
Recently, it was shown that laser-induced forward transfer (LIFT) technology and the laser engineering of microbial systems (LEMS) technique (based on LIFT method) are effective for isolation of micro-organisms from different complex substrates. These techniques frequently utilize Au as an
Laser-induced forward transfer from healing silver paste films printing
Turkoz E, et al.
Applied Physics Letters, 113(22), 221601/1-221601/5 (2018)
Printing of complex free-standing microstructures via laser-induced forward transfer (LIFT) of pure metal thin films
Feinaeugle M, et al.
Additive Manufacturing, 24, 391-399 (2018)

文章

High Crystalline Organic Transistors

Small molecular weight organic semiconductors are promising for flexible transistor applications in next-gen soft electronics.

高結晶有機電晶體

小分子量有機半導體在下一代軟電子的柔性電晶體應用上大有可為。

Advancements in Organic Electronics

Professors Tokito and Takeda share design principles and optimization protocols for organic electronic devices, focusing on flexibility and low cost.

我們的科學家團隊在所有研究領域都有豐富的經驗，包括生命科學、材料科學、化學合成、色譜、分析等.

聯絡技術服務