跳轉至內容
Merck
全部照片(2)

重要文件

900442

Sigma-Aldrich

石墨烯/PEDOT：PSS 混合油墨

dispersion in DMF, avg. no. of layers, 1 ‑ 3

同義詞:

G/PEDOT:PSS, 导电油墨, 电化学剥脱石墨烯油墨, 石墨烯油墨

登入查看組織和合約定價
全部照片(2)

About This Item

分類程式碼代碼:
12352401
NACRES:
NA.23
暫時無法取得訂價和供貨情況

品質等級

100

形狀

dispersion (in DMF)

特點

avg. no. of layers 1 ‑ 3

濃度

0.2 mg/mL (PEDOT:PSS)
1 mg/mL (electrochemically exfoliated graphene)

薄層電阻

500 Ω/sq, 20 nm film: 80% transmittance

相關類別

一般說明

  • 石墨烯的制备方法：电化学剥脱法。
  • 石墨烯厚度 AFM：80%，1-3 层。
  • AFM 测量片材尺寸：10μm.
  • 氧含量：7.5%（通过 XPS 测定）（C/O 比：12.3）。
  • Raman I_D/I_G 比值：0.4。
  • 表电阻：4.8 kΩ/sq.
  • 所生产薄膜的典型属性（喷涂后）：
a）11 nm 薄膜：90% 透射比，1200Ω/sq（按原样计）。
b）20 nm 薄膜：80% 透射率，500Ω/sq（按原样计）。

訊號詞

Danger

危險分類

Acute Tox. 4 Dermal - Acute Tox. 4 Inhalation - Eye Irrit. 2 - Flam. Liq. 3 - Repr. 1B

儲存類別代碼

3 - Flammable liquids

水污染物質分類（WGK）

WGK 2

閃點（°F）

136.4 °F

閃點（°C）

58 °C

從最近期的版本中選擇一個：

分析證明 (COA)

Lot/Batch Number
MKCV4483
MKCW4551
MKCW9709
MKCV2425
MKCT3044

未看到正確版本？

如果您需要一個特定的版本，您可以透過批號來尋找特定憑證。

搜尋 COA

已經擁有該產品？

您可以在文件庫中找到最近購買的產品相關文件。

存取文件庫

Zhaoyang Liu et al.
Advanced materials (Deerfield Beach, Fla.), 27(4), 669-675 (2014-12-03)
A novel solution fabrication of large-area, highly conductive graphene films by spray-coating of a hybrid ink of exfoliated graphene (EG)/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) (PH1000) is demonstrated. The fabricated graphene films exhibit excellent mechanical properties, thus enabling their application as bottom electrodes in
Transparent graphene/PEDOT-PSS composite films as counter electrodes of dye-sensitized solar cells.
Hong, et al.
Electrochemical Communications, 10(10), 1555-1558 (2008)
Peng You et al.
Advanced materials (Deerfield Beach, Fla.), 27(24), 3632-3638 (2015-05-15)
Semitransparent perovskite solar cells are prepared by laminating graphene transparent electrodes on the top for the first time. The device performance is optimized by improving the conductivity of the graphene electrodes and the contact between the graphene and the perovskite
Zhong-Shuai Wu et al.
Advanced materials (Deerfield Beach, Fla.), 27(24), 3669-3675 (2015-05-15)
Ultrathin printable graphene supercapacitors are demonstrated, based on solution-processed electrochemically exfoliated graphene hybrid films on an ultrathin poly(ethylene terephthalate) substrate, exhibiting an unprecedented volumetric capacitance of 348 F cm(-3) , an ultrahigh scan rate of 2000 V s(-1) , and

文章

Self healable PEDOT based film hydrogel and OECT devices

Advancements in bioelectronics, incorporating self-healing materials for wearable devices, and measuring bioelectric signals to assess physiological parameters.

Organic Bioelectronic Materials and Devices for Bridging Biology and Traditional Electronics

Professor Rivnay (Northwestern University, USA) discusses using organic mixed conductors as an alternative to efficiently bridge the ionic world of biology with contemporary microelectronics.

Stretchable Electroluminescent Devices

Self-healing soft electronic materials offer potential cost savings and reduced electronic waste.

Recent Advances in Scalable Synthesis and Processing of Two-Dimensional Materials

Advances in scalable synthesis and processing of two-dimensional materials

Questions

1–2 of 2 Questions  

  1. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 answer

    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      Helpful?

  2. How can I determine the shelf life / expiration / retest date of this product?

    1 answer

    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdf

      Helpful?

Reviews

No rating value

Active Filters

我們的科學家團隊在所有研究領域都有豐富的經驗，包括生命科學、材料科學、化學合成、色譜、分析等.

聯絡技術服務