Alpha-terpineol can be used for dilution, as it is a component of this product. However, no specific method or protocol for dilution is available.
推薦產品
品質等級
形狀
paste (microparticles)
環保替代產品特色
Design for Energy Efficiency
Learn more about the Principles of Green Chemistry.
sustainability
Greener Alternative Product
濃度
≥75%
電阻係數
1-3 * 10^-5 Ω-cm (conductive paste)
1.59 μΩ-cm, 20°C
基質
α-Terpineol
粒徑
200 nm (80%)
<5 nm (20%)
黏度
100,000-300,000 cP, 0.4 rpm(25 °C, Brookfield)
bp
2212 °C (lit.)
mp
960 °C (lit.)
轉變溫度
curing temperature 120-150 °C (30-60 min)
密度
10.49 g/cm3 (lit.)
環保替代類別
, Enabling
儲存溫度
2-8°C
SMILES 字串
[Ag]
InChI
1S/Ag
InChI 密鑰
BQCADISMDOOEFD-UHFFFAOYSA-N
相關類別
訊號詞
Danger
危險聲明
危險分類
Aquatic Acute 1 - Aquatic Chronic 1 - Eye Dam. 1 - Skin Irrit. 2
儲存類別代碼
11 - Combustible Solids
水污染物質分類（WGK）
WGK 3
閃點（°F）
205.0 °F
閃點（°C）
96.1 °C
客戶也查看了
Optimization of physical properties of vacuum evaporated CdTe thin films with the application of thermal treatment for solar cells
Chander S and Dhaka MS
Materials Science in Semiconductor Processing, 40, 708-712 (2015)
Structural transformations of mechanically alloyed polycrystalline YMnO 3-based material for gas sensing application
Abdullah NH, et al.
Journal of the Australasian Ceramic Society, 18(8), 1-12 (2019)
A Hydrogen Gas Sensor Based on TiO2 Nanoparticles on Alumina Substrate
Mohd Chachuli S, et al.
Sensors, 18(8), 2483-2483 (2018)
Physical properties of vacuum evaporated CdTe thin films with post-deposition thermal annealing
Chander S and Dhaka MS
Physica E: Low-Dimensional Systems and Nanostructures, 73, 35-39 (2015)
Ii-Ho Kim et al.
Journal of nanoscience and nanotechnology, 13(5), 3660-3664 (2013-07-19)
Ag-dispersed Bi0.5Sb1.5Te3 was prepared successfully by silver acetate (AgOAc) decomposition and hot pressing. The Ag nanoparticles were well-dispersed in the Bi0.5Sb1.5Te3 matrix, and acted as phonon scattering centers effectively. The electrical conductivity increased systematically with increasing amount of Ag nanoparticle
文章
Small molecular weight organic semiconductors are promising for flexible transistor applications in next-gen soft electronics.
小分子量有機半導體在下一代軟電子的柔性電晶體應用上大有可為。
本文將強調使用超音波噴射方法的多樣化應用及奈米結構材料。
The diversity of applications and nanostructured materials accessible using ultrasonic spray methods are highlighted in this article.
-
Do you have any suggestion for dilution? I want to control the viscosity. I confirmed that the dispersion matrix is alpha-terpineol. Can I use that solvent to dilute it? If so, Could you recommend the specific method? (i.e. sonication)
1 answer-
Helpful?
-
-
How is shipping temperature determined? And how is it related to the product storage temperature?
1 answer-
Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf
Helpful?
-
-
How can I determine the shelf life / expiration / retest date of this product?
1 answer-
If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdfHelpful?
-
-
Does this paste contain any silicones or siloxanes?
1 answer-
This product is ≥75% Silver. The remaining content is the α-Terpineol dispersion matrix. There are no silicone or siloxane components present.
Helpful?
-
-
what is the curing temperature of silver conducting paste ?
1 answer-
As stated in the 'PROPERTIES' section of the product page, the curing temperature is 120-150 °C for 30-60 min.
Helpful?
-
-
What is the duration for bonding two structures together when using this product? Additionally, how long does it take to solidify? Also, I need information on the duration until it is no longer conductive.
1 answer-
The duration for solidification and conductivity can vary based on factors such as substrate type and curing temperature. Additionally, we do not have any experience or test results regarding your technical inquiry
Helpful?
-
Active Filters
我們的科學家團隊在所有研究領域都有豐富的經驗，包括生命科學、材料科學、化學合成、色譜、分析等.
聯絡技術服務
