跳轉至內容
Merck
全部照片(2)

重要文件

檢視所有文件

695890

Sigma-Aldrich

甲基丙烯酸-2-羟乙基酯磷酸酯

contains 700-1000 ppm monomethyl ether hydroquinone, 90%

同義詞:

2-Hydroxyethyl methacrylate phosphate

登入查看組織和合約定價
全部照片(2)

About This Item

線性公式:
C6H10O3 · xH3PO4
CAS號碼:
52628-03-2
MDL號碼:
MFCD28045008
分類程式碼代碼:
12162002
NACRES:
NA.23
暫時無法取得訂價和供貨情況

描述

~25% diester content

化驗

90%

形狀

liquid

包含

700-1000 ppm monomethyl ether hydroquinone

折射率

n20/D 1.4688

密度

1.37 g/mL at 25 °C

儲存溫度

2-8°C

SMILES 字串

[P](=O)(O)(O)O.O(CCO)C(=O)C(=C)C

InChI

1S/C6H10O3.H3O4P/c1-5(2)6(8)9-4-3-7;1-5(2,3)4/h7H,1,3-4H2,2H3;(H3,1,2,3,4)

InChI 密鑰

POLZHVHESHDZRD-UHFFFAOYSA-N

相關類別

一般說明

磷酸甲基丙烯酸2-羟乙酯是一种由磷酸单体和甲基丙烯酸二乙酯组成的磷酸酯。由于它对金属离子具有高亲和力，因此可以用作螯合吸收剂。[1][2]

應用

磷酸2-甲基丙烯酸羟乙酯可在颅面应用中用于聚四氟乙烯（PTFE）表面功能化。[3]

象形圖

CorrosionExclamation mark
GHS05,GHS07

訊號詞

Danger

危險分類

Acute Tox. 4 Oral - Eye Dam. 1 - Met. Corr. 1 - Skin Corr. 1B - STOT SE 3

標靶器官

Respiratory system

儲存類別代碼

8A - Combustible corrosive hazardous materials

水污染物質分類（WGK）

WGK 3

閃點（°F）

293.0 °F - open cup

閃點（°C）

145 °C - open cup

個人防護裝備

Faceshields, Gloves, Goggles, type ABEK (EN14387) respirator filter

從最近期的版本中選擇一個：

分析證明 (COA)

Lot/Batch Number
MKCW8536
MKCT3004
MKCQ8440
MKCN0327
MKCL1600

未看到正確版本？

如果您需要一個特定的版本，您可以透過批號來尋找特定憑證。

搜尋 COA

已經擁有該產品？

您可以在文件庫中找到最近購買的產品相關文件。

存取文件庫

Influence of self-etching primer treatment on the adhesion of resin composite to polished dentin and enamel
Hayakawa T, et al.
Dental Materials : Official Publication of the Academy of Dental Materials, 14(2), 99-105 (1998)
Byoung I Suh et al.
The journal of adhesive dentistry, 5(4), 267-282 (2004-03-11)
This study examined the polymerization kinetics of acid-contaminated light- and chemically-cured resins with the use of differential scanning calorimetry. Light-cured and chemically-cured versions of an experimental bis-GMA/TEG-DMA resin at the ratio (w:w) of 62:38 were prepared. Four acidic resin monomers
Karina A George et al.
Biomacromolecules, 5(4), 1194-1199 (2004-07-13)
Cross-linked homopolymers and copolymers of 2-hydroxyethyl methacrylate, HEMA, and ethylene glycol methacrylate phosphate, MOEP, have been synthesized, and the diffusion of water into these systems has been investigated. Only polymers with 0-20 mol % MOEP exhibited ideal swelling behavior as
C A Munoz-Viveros
Compendium of continuing education in dentistry. (Jamesburg, N.J. : 1995). Supplement, (23)(23), S3-S5 (2002-07-02)
With the constant advance of technology and the public's increasing awareness of esthetically pleasing restorations, alternatives for amalgam and early composite materials have been brought to the forefront of dentistry. Condensable composites offer characteristics that distinguish them from their traditional
D J Epasinghe et al.
Journal of dentistry, 40(3), 173-180 (2011-12-14)
This study evaluated the effect of proanthocyanidin (PA) incorporation into experimental dental adhesives on resin-dentine bond strength. Four experimental hydrophilic adhesives containing different PA concentrations were prepared by combining 50wt% resin comonomer mixtures with 50wt% ethanol. Proanthocyanidin was added to
查看所有相關論文

Questions

1–2 of 2 Questions  

  1. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 answer

    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      Helpful?

  2. How can I determine the shelf life / expiration / retest date of this product?

    1 answer

    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdf

      Helpful?

Reviews

No rating value

Active Filters

我們的科學家團隊在所有研究領域都有豐富的經驗，包括生命科學、材料科學、化學合成、色譜、分析等.

聯絡技術服務