The bags are not permeable and are suitable for storing gases for 2-3 days. However, caution must be observed so as not to over-fill the bags. All gas sampling bags (Tedlar and Supel-Inert) should only be filled to 80% of the volume to prevent overpressure. Filling the bag with pressures greater than 1 psi (~0.07 bar) could cause the bag to burst or leak the sample.
推荐产品
agency
NIOSH 6603
OSHA ID-172,ID-210
描述
Chemically Inert with Light and Moisture Protection
septum replaceable; Thermogreen® LB-2 septa
產品線
Supel™
包裝
pkg of 10 bags
技術
whole air sampling: suitable
最大體積
1 L
尺寸 × 寬度 × 長度
× 7 in. × 9 in.
適合性
suitable for (Biogas and Landfill Gas (LFG))
suitable for (Calibration Mixes and Gas Transfer)
suitable for (Low molecular weight compounds such as methane, CO, CO2, and permanent gases)
suitable for
應用
air monitoring
environmental
industrial hygiene
正在寻找类似产品? 访问 产品对比指南
一般說明
主要特点和好处:
- 由两层铝膜外层组成的多层箔为渗透通过袋壁的气体提供了很大的屏障
- 经证实的低渗Thermogreen LB-2隔膜安装在在阀门配件中
- 有化学惰性,防潮避光
- 由于背景水平,不建议用于低ppm VOC(我们建议使用SupelInert PVDF Tedlar替代膜作为VOC)
- 有两种阀门选择:螺旋盖阀(SCV)和推/拉锁定阀(PLV)
- 4种规格:1 L、2 L、5 L和10 L
法律資訊
空氣採樣器
儲存類別代碼
11 - Combustible Solids
水污染物質分類(WGK)
WGK 3
閃點(°F)
Not applicable
閃點(°C)
Not applicable
其他客户在看
-
How permeable are they? We are looking at storing hydrogen for 2/3 days in these bags. Is this viable ?
1 answer-
Helpful?
-
-
Do you sell the septa of these bags separately as well? The manual says septa can be replaced, and the bag reused even after the septum has too many punctures and doesn't seal properly anymore. If you do, I'd like to order septa only.
1 answer-
Yes, the septa replacement product number is 29458-U. Please see the link below to access the replacement:
https://www.sigmaaldrich.com/product/supelco/29458uHelpful?
-
Active Filters
我们的科学家团队拥有各种研究领域经验,包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.
联系客户支持