Parafilm is not a sterile product. However, Parafilm can be sterilized using either radiation (UV) or chemical (H2O2) sterilization techniques. There is no protocol available. Please check the literature for additional information.
Kluczowe dokumenty
P7793
PARAFILM® M
roll size 4 in. × 125 ft
Synonim(y):
Sealing film, Stretch film
Wybierz wielkość
244,00 zł
Wybierz wielkość
About This Item
244,00 zł
Polecane produkty
Materiały
film (thermoplastic)
sterylność
non-sterile
opakowanie
pack of 1 ea
producent / nazwa handlowa
Parafilm PM996
Parametry
-45-+50 °C temp. range
szer. × dł.
10 cm × 38 m
rozmiar rolki
4 in. × 125 ft
Szukasz podobnych produktów? Odwiedź Przewodnik dotyczący porównywania produktów
Opis ogólny
Protect the integrity of research applications with a tight moisture-barrier that holds a strong seal and doesn′t release from glassware, despite off-gassing
Reduce the risk of tampered data with a covering that is odorless, colorless and semi-transparent
Prevents moisture and volume loss due to material composition and tight seal
Flexible and self-sealing material allows it to cling around irregular shapes and surfaces
Stretches more than 200% of original length
Resistant up to 48 hours against many polar substances such as saline solutions, inorganic acids and alkaline solutions
Permeability
Oxygen: (ASTM 1927-98) 150 cc/m² d at 23°C and 50% RH
Carbon Dioxide: (Modulated IR Method) 1200 cc/m² d at 23°C and 0% RH
Water Vapor: (ASTM F1249-01)
Flat: 1 g/m² d at 38°C and 90% RH
Creased: 1 g/m² d at 38°C and 90% RH
Effects of Common Reagents
Potassium Permanganate
5%: No apparent effect except permanent dark brown coloration in 18 hours
0.1%: Same as 5% except slightly less color
Iodine solution (0.1N)
No effect except staining brown in 18 hours
Ethyl Alcohol (95%)
No apparent effect except some face whitening in 24 hours
No apparent effect in 24 hours:
Hydrochloric Acid conc. (12N) dil. (5N)
Sulphuric Acid conc. (36N) dil. (5N)
Nitric Acid conc. (16N) dil. (5N)
Sodium Hydroxide conc. (22%)
Ammonium Hydroxide conc. (28% NH<sub>3</sub>)
Salt (NaCl) solution (20%)
Isopropyl Alcohol (99%)
Not recommended for use with chlorinated, non-polar aliphatic and aromatic solvents
Film becomes soft and sticky at about 130° to 150°F (54° to 66°C)
Informacje prawne
Wybierz jedną z najnowszych wersji:
Certyfikaty analizy (CoA)
Przepraszamy, ale COA dla tego produktu nie jest aktualnie dostępny online.
Proszę o kontakt, jeśli potrzebna jest pomoc Obsługa Klienta
Masz już ten produkt?
Dokumenty związane z niedawno zakupionymi produktami zostały zamieszczone w Bibliotece dokumentów.
Protokoły
Step-by-step stem cell culture protocols for human induced pluripotent stem cells (iPSCs) including ips cell thawing, expanding, freezing and characterizing.
Protokoły hodowli ludzkich indukowanych pluripotencjalnych komórek macierzystych (iPSC) krok po kroku, w tym rozmrażanie, ekspansja, zamrażanie i charakteryzowanie komórek ips.
-
I'm designing an experiment which involves using Parafilm M as a coverslip for a bacterial culture. Therefore, I need it to sterilize it previously. Which methods are suitable for this process? Thank you!
1 answer-
Helpful?
-
-
Ich habe immer Parafilm M. (Bemis 12) genutzt. Nun habe ich die einzelnen Strips hier, und man kann das Trägerpapier nicht ablösen; zumindest weiß ich nicht wie. Gibt es da einen Trick oder klebt die Folie nach 3 Jahren einfach fest auf dem Träger?
1 answer-
Parafilm is generally very stable. the temperature range for continuous use is -45 to 50 deg. C. Storage at or excursion beyond this range may impact the physical properties making it difficult to use and possibly separate from the backing. Some tips to separate from the backing include rubbing between fingers, creasing or trying to tear an edge or corner, scraping or marking with a micro spatula or other firm edged item. Below see the general use video on Parafilm that uses the creasing method.
https://www.youtube.com/watch?v=-kw7rBJxH3oHelpful?
-
Active Filters
Nasz zespół naukowców ma doświadczenie we wszystkich obszarach badań, w tym w naukach przyrodniczych, materiałoznawstwie, syntezie chemicznej, chromatografii, analityce i wielu innych dziedzinach.
Skontaktuj się z zespołem ds. pomocy technicznej