Przejdź do zawartości
Merck

GF61121304

Molybdenum

foil, not light tested, 100x100mm, thickness 0.007mm, 99.9%

Synonim(y):

Molybdenum, MO000150

Zaloguj sięWyświetlanie cen organizacyjnych i kontraktowych

Wybierz wielkość

1 EA
9140,00 zł

9140,00 zł


Skontaktuj się z Obsługą Klienta, aby uzyskać informacje na temat dostępności

Poproś o zamówienie zbiorcze

Wybierz wielkość

Zmień widok
1 EA
9140,00 zł

About This Item

Wzór empiryczny (zapis Hilla):
Mo
Numer CAS:
Masa cząsteczkowa:
95.94
Numer MDL:
Kod UNSPSC:
12141727
Identyfikator substancji w PubChem:
NACRES:
NA.23

9140,00 zł


Skontaktuj się z Obsługą Klienta, aby uzyskać informacje na temat dostępności

Poproś o zamówienie zbiorcze

Próba

99.9%

Formularz

foil

producent / nazwa handlowa

Goodfellow 611-213-04

rezystywność

5.0 μΩ-cm, 20°C

rozmiar × grubość

100x100 mm × 0.007 mm

bp

4612 °C (lit.)

mp

2617 °C (lit.)

gęstość

10.3 g/mL at 25 °C (lit.)

ciąg SMILES

[Mo]

InChI

1S/Mo

Klucz InChI

ZOKXTWBITQBERF-UHFFFAOYSA-N

Opis ogólny

For updated SDS information please visit www.goodfellow.com.

Informacje prawne

Product of Goodfellow
Ta strona może zawierać tekst przetłumaczony maszynowo.

Wybierz jedną z najnowszych wersji:

Certyfikaty analizy (CoA)

Lot/Batch Number

It looks like we've run into a problem, but you can still download Certificates of Analysis from our Dokumenty section.

Proszę o kontakt, jeśli potrzebna jest pomoc Obsługa Klienta

Masz już ten produkt?

Dokumenty związane z niedawno zakupionymi produktami zostały zamieszczone w Bibliotece dokumentów.

Odwiedź Bibliotekę dokumentów

J G Watkins et al.
The Review of scientific instruments, 79(10), 10F125-10F125 (2008-12-03)
Two modular arrays of Langmuir probes designed to handle a heat flux of up to 25 MW/m(2) for 10 s exposures have been installed in the lower divertor target plates of the DIII-D tokamak. The 20 pyrolytic graphite probe tips
Dattatray J Late et al.
Nanotechnology, 19(26), 265605-265605 (2008-07-02)
Nanocrystalline lanthanum hexaboride (LaB(6)) films have been deposited on molybdenum foil by the pulsed laser deposition (PLD) technique. The as-deposited films were characterized by x-ray diffraction (XRD), scanning electron microscopy (SEM) and atomic force microscopy (AFM). The XRD pattern shows
Charles F Baker et al.
Dalton transactions (Cambridge, England : 2003), (9)(9), 1298-1303 (2004-07-15)
New molybdenum(VI) nitride oxides were synthesised by the reaction of strontium nitride and calcium nitride with molybdenum foil at high temperature in sealed stainless steel crucibles. The reactions yielded single crystalline products determined by X-ray diffraction to form complex structures
P Kielczynski et al.
IEEE transactions on ultrasonics, ferroelectrics, and frequency control, 46(1), 233-238 (2008-02-02)
In this paper the theoretical analysis and the results of testing of a piezoelectric cantilever for the investigation of material surfaces are presented. The cantilever consists of a thin piezoelectric plate bonded with a thin metal (e.g., molybdenum) foil. The
Viswanathan S Saji et al.
ChemSusChem, 5(7), 1146-1161 (2012-06-14)
The electrochemical behaviors of molybdenum and its oxides, both in bulk and thin film dimensions, are critical because of their widespread applications in steels, electrocatalysts, electrochromic materials, batteries, sensors, and solar cells. An important area of current interest is electrodeposited

Questions

Reviews

No rating value

Active Filters

Nasz zespół naukowców ma doświadczenie we wszystkich obszarach badań, w tym w naukach przyrodniczych, materiałoznawstwie, syntezie chemicznej, chromatografii, analityce i wielu innych dziedzinach.

Skontaktuj się z zespołem ds. pomocy technicznej