1.52014

Chromolith^® RP-18 endcapped (monolithic) HPLC Columns

L × I.D. 25 mm x 2 mm HPLC Column

• Synonyme(s) : Chromolith^® Flash RP-18 endcapped 25-2 HPLC column
• Code UNSPSC : 41115709
• Nomenclature NACRES : SB.52

Propriétés

• product name: Colonne Chromolith^® RP-18 Endcapped., L × I.D. 25 mm x 2 mm HPLC column
• Matériaux: PEEK column
• Niveau de qualité: 100
• Agence: suitable for USP L1
• Gamme de produits: Chromolith^®
• Caractéristiques: endcapped
• Conditionnement: 1 ea of
• Ampleur du marquage: 18% Carbon loading
• Paramètres: 200 bar pressure; 45 °C max. temp.
• Technique(s): HPLC: suitable; LC/MS: suitable; UHPLC-MS: suitable; UHPLC: suitable; mass spectrometry (MS): suitable (High)
• Colonne, L × D.I.: 2.5 cm × 2 mm
• Matrice: monolithic silica
• Groupe de la matrice active: C18 bonding phase
• Dimension de pores: 1.5 μm macroporosity; 13 nm mesoporosity
• operating pH range: 2-7.5
• Technique de séparation: reversed phase
• Température de stockage: no temp limit

Description

Description générale

Chromolith^® columns are made of monolithic silica with a characteristic bimodal pore structure.

Chromolith^® Flash RP-18 endcapped 25-2 columns have macropores with 1.5 μm diameter, giving a column efficiency exceeding 100,000 plates/meter. The mesopores are 13 nm (130 Å), the surface modification is octadecylsilane with full end-capping. Chromolith^® Flash RP-18 endcapped 25-2 columns fall under the USP L1 Classification. The column efficiency is comparable to a 3-4 μm particle size fully porous particulate column. Chromolith^® Flash RP-18 endcapped 25-2 columns are perfectly suitable for LC-MS applications.
The column dimension of 25 mm length and 2 mm I.D. is the best choice for rapid separations on any U/HPLC System.

The revolutionary, monolithic silica with its unique combination of macropores and mesopores enables:
—Rapid separations at very low column back-pressure
—High matrix tolerance, allowing time and cost savings with simplified workflows
—Cost-savings due to extended column lifetimes
—Connection of columns, flow gradients and the use of mobile phases with higher viscosity

The recommended Guard-columns are:
Chromolith^® RP-18 endcapped 5-2 guard cartridges (3 pieces) " /product/mm/152009">1.52009] with the Chromolith^® Guard Cartridge Holder (kit) 5 mm x 2 mm [1.52004]
The Chromolith^® column coupler can be used to significantly increase the separation efficiency of Chromolith^® columns by coupling several columns in series (up to 100,000 plates/per column). [1.51467]

Learn more:
Brochure: Race through your Separations on Any System. Chromolith^® Monolithic Silica HPLC Columns

All Supelco HPLC Columns, including monolithic Chromolith^® columns, are fully compatible to all HPLC and UHPLC Instruments.
Supelco HPLC Products: The Best Choice for Any LC Instrument

Remarque sur l'analyse

Pressure: ≤ 20 bar
Performance (anthracene)
Theoretical Plates (N/m) (Anthracene): ≥ 70000
Capacity factor (Anthracene): 3.3 - 4.3
Tailing (USP): 0.90 - 1.40 %
separation factor (anthracene/progesterone): 2.2 - 2.6

Informations légales

Chromolith is a registered trademark of Merck KGaA, Darmstadt, Germany