콘텐츠로 건너뛰기
Merck
모든 사진(1)

주요 문서

85409

Sigma-Aldrich

Silicone oil

Silicone oil

동의어(들):

Dimethyl polysiloxane

로그인조직 및 계약 가격 보기

크기 선택

250 ML
₩216,297
1 L
₩662,897

₩216,297


출고 가능일2025년 4월 04일세부사항


벌크 견적 요청

크기 선택

보기 변경
250 ML
₩216,297
1 L
₩662,897

About This Item

Linear Formula:
[-Si(CH3)2O-]n
CAS Number:
MDL number:
UNSPSC 코드:
12352100
NACRES:
NA.21

₩216,297


출고 가능일2025년 4월 04일세부사항


벌크 견적 요청

vapor density

>1 (vs air)

Quality Level

vapor pressure

<5 mmHg ( 25 °C)
5 mmHg ( 20 °C)

양식

oil

refractive index

n20/D 1.403 (lit.)
n20/D 1.406

점도

100 mPa.s(20 °C)

bp

>140 °C/0.002 mmHg (lit.)

density

0.967 g/mL at 20 °C

유사한 제품을 찾으십니까? 방문 제품 비교 안내

일반 설명

Silicone oil is typically used for oil baths in research labs for reactions that require heating/reflux temperatures in the range of -50°C to +200°C. Oil baths provide more uniform heat in comparison to other heating devices.
Silicone oil is useful for the preparation of oil baths having a temperature in the range of -50°C to +200°C.

애플리케이션

Silicone oil has been used for the protection of carbon steel alloy samples in a study.[1] Silicone oil has also been used as a heat reservoir during NMR (Nuclear Magnetic Resonance) analysis.[2]

Storage Class Code

10 - Combustible liquids

WGK

WGK 1

Flash Point (°F)

214.0 °F - closed cup

Flash Point (°C)

101.1 °C - closed cup

개인 보호 장비

Eyeshields, Gloves


가장 최신 버전 중 하나를 선택하세요:

시험 성적서(COA)

Lot/Batch Number

적합한 버전을 찾을 수 없으신가요?

특정 버전이 필요한 경우 로트 번호나 배치 번호로 특정 인증서를 찾을 수 있습니다.

이 제품을 이미 가지고 계십니까?

문서 라이브러리에서 최근에 구매한 제품에 대한 문서를 찾아보세요.

문서 라이브러리 방문

이미 열람한 고객

Low-temperature atomic layer deposition of Al2O3 thin coatings for corrosion protection of steel: surface and electrochemical analysis.
Diaz B, et al.
Corrosion Science, 53(6), 2168-2175 (2011)
M Findeisen et al.
Magnetic resonance in chemistry : MRC, 45(2), 175-178 (2006-12-13)
Most established NMR thermometers rely on temperature-dependent chemical shift differences measured from samples that are either neat or concentrated solutions (e.g. ethylene glycol, methanol). These are unsuitable for modern cryoprobes on account of strong radiation damping resulting from the high
Zhiyong Li et al.
Optics express, 21(1), 1281-1286 (2013-02-08)
A gold nanorod-facilitated optical heating method for droplets in microfluidic chips is reported. Individual and stream nanoliter level droplets containing gold nanorods are heated by a low power 808-nm-wavelength laser. Owing to the high photothermal conversion efficiency of gold nanorods
Amir Sanati Nezhad et al.
Proceedings of the National Academy of Sciences of the United States of America, 110(20), 8093-8098 (2013-05-01)
Tip-growing cells have the unique property of invading living tissues and abiotic growth matrices. To do so, they exert significant penetrative forces. In plant and fungal cells, these forces are generated by the hydrostatic turgor pressure. Using the TipChip, a
Dennis C van Duijvenbode et al.
Foot and ankle surgery : official journal of the European Society of Foot and Ankle Surgeons, 19(1), 27-30 (2013-01-23)
The purpose of this retrospective study is to evaluate patient-related outcome and reoperation rate of the Swanson prosthesis in patients with and without grommets. Between 1981 and 1999, 98 Swanson MTP-1 prostheses were implanted in 84 patients (14 bilateral). The

질문

1–2 / 2 질문  
  1. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 답변
    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      도움이 되었습니까?

  2. How can I determine the shelf life / expiration / retest date of this product?

    1 답변
    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdf

      도움이 되었습니까?

후기

활성 필터

  1. 1 평점-상품평만

자사의 과학자팀은 생명 과학, 재료 과학, 화학 합성, 크로마토그래피, 분석 및 기타 많은 영역을 포함한 모든 과학 분야에 경험이 있습니다..

고객지원팀으로 연락바랍니다.