The item is not autoclavable. The maximum recommended temperature is 70°C. See below for Maintenance & Cleaning instructions:
- Clean the filter holder regularly. The frequency of cleaning will depend on the level of contamination in the fluid being filtered.
1. Remove the holder from the plumbing system.
2. Disassemble it completely and remove all Teflon wrapping from the connector threads.
3. Clean components with a sponge, hot water, and a non-abrasive cleaner. Scrub threaded parts, recesses, and orifices with a stiff bristle brush and cleaner to remove all traces of contaminants. CAUTION: To avoid damage never use steel wool or abrasive materials on any part of the holder or support screens.
4. Rinse all parts thoroughly with hot running tap water and then rinse with cold laboratory grade water.
5. Allow the components to air dry while disassembled.
₩412,902
구입 가능 여부는 고객센터에 문의하십시오.
추천 제품
material
Nylon knob(s) (for hand)
polypropylene (filled)
silicone seal
Quality Level
파라미터
5.5 bar max. inlet pressure (80 psi)
70 °C max. temp. at 5.5 bar
기술
pressure filtration: suitable
길이
12 cm
직경
7.6 cm
필터 직경
47 mm
여과 면적
13.8 cm2
전처리 필터 직경
42 mm , thick depth prefilter
47 mm , membrane prefilter
피팅
inlet connector for 6-9.5 mm I.D. flexible tubing
1/4 in. female NPT inlet fitting
outlet connector for 6-9.5 mm I.D. flexible tubing
1/4 in. female NPT outlet fitting
응용 분야
filtration
호환성
for use with In-Line Filter Holder
배송 상태
ambient
일반 설명
In-Line Filter Holders are commonly use to ultraclean liquids or gases in line by pressure filtration. Simply open the housing to change the filter without disturbing the attached plumbing.
Features & Benefits:
•Stepped hose barb connections at both ends for easy installation
•Large, easy to grip hand knobs
Catalog Number Description
XX4304700 In-Line Filter Holder 47 mm
Replacement Parts
XX1104715 Support screen, 47 mm, polypropylene
XX4304701 O-ring (2-131), silicone
XX4304704 Hose adapter, 1/4 in. NPTF to 5/16 in. ID, polypropylene
XX4304705 Hand Knobs
Accessories
XX4304702 O-ring, (2-131), fluoroelastomer
XX4304707 Stainless Steel Support Screen, 47 mm
XX6200006P Filter forceps, blunt end, stainless steel
XX6700034 3 meters PVC tubing with 9.5 mm internal diameter
Features & Benefits:
•Stepped hose barb connections at both ends for easy installation
•Large, easy to grip hand knobs
Catalog Number Description
XX4304700 In-Line Filter Holder 47 mm
Replacement Parts
XX1104715 Support screen, 47 mm, polypropylene
XX4304701 O-ring (2-131), silicone
XX4304704 Hose adapter, 1/4 in. NPTF to 5/16 in. ID, polypropylene
XX4304705 Hand Knobs
Accessories
XX4304702 O-ring, (2-131), fluoroelastomer
XX4304707 Stainless Steel Support Screen, 47 mm
XX6200006P Filter forceps, blunt end, stainless steel
XX6700034 3 meters PVC tubing with 9.5 mm internal diameter
시험 성적서(COA)
제품의 로트/배치 번호를 입력하여 시험 성적서(COA)을 검색하십시오. 로트 및 배치 번호는 제품 라벨에 있는 ‘로트’ 또는 ‘배치’라는 용어 뒤에서 찾을 수 있습니다.
이미 열람한 고객
-
Hello Dear. Is it Autoclavable?
1 답변-
도움이 되었습니까?
-
활성 필터
자사의 과학자팀은 생명 과학, 재료 과학, 화학 합성, 크로마토그래피, 분석 및 기타 많은 영역을 포함한 모든 과학 분야에 경험이 있습니다..
고객지원팀으로 연락바랍니다.
