SGW6A47HH3

Polysep^™ II 1.0/0.5 µm nominal, OptiScale^® Capsule

OptiScale^® 47, filtration area 17.7 cm², pore size 1.0/0.5 μm

• 동의어(들): Optiscale Capsule Polysep II 1.0/0.5 μm 1/4 in. HB/HB
• UNSPSC 코드: 23151806
• eCl@ss: 32031690

속성

• material: PVDF vent cap; borosilicate glass fiber (BGF) membrane; fluoroelastomer FKM seal; mixed cellulose esters (MCE) membrane; polycarbonate ; polypropylene support
• Quality Level: 400
• 규정 준수: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
• 무균: non-sterile
• 멸균 적합성: autoclavable compatible
• 제품 라인: OptiScale^® 47
• 특징: hydrophilic
• 제조업체/상표: OptiScale^®
• 파라미터: 25 °C max. inlet temp.; 5.5 bar max. inlet pressure (80 psi) at 25 °C; 80 psig max. inlet pressure
• 기술: prefiltration: suitable
• 직경: 6.9 cm (2.7 in.)
• 여과 면적: 17.7 cm²
• 입구 연결 직경: 1/4 in.
• 출구 연결 직경: 1/4 in.
• 불순물: ≤0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
• 기질: Polysep^™ II
• pore size: 1.0/0.5 μm nominal pore size; 1.0/0.5 μm pore size
• 입력: sample type liquid
• 피팅: inlet hose barb; outlet hose barb; (6 mm (1/4 in.) Hose Barb Inlet and Outlet)

설명

일반 설명

Device Configuration: Capsule

특징 및 장점

Format: Double Layer

기타 정보

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Directions for Use

• Organism Retention: Bacterial
• Mode of Action: Filtration (size exclusion)
• Application: Protein purification
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer installation and wetting sections of OPTISCALE^®-25 user guide
• Storage Statement: Please refer OPTISCALE^®-25 user guide
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

제조 메모

Sterilization Method
3 autoclave cycles of 60 min @ 121 °C; not in-line steam sterilizable

분석 메모

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥100 mL

법적 정보

OptiScale is a registered trademark of Merck KGaA, Darmstadt, Germany

Polysep is a trademark of Sigma-Aldrich Co. LLC

안전성 정보

• 픽토그램: GHS08
• 신호어: Danger
• 유해 및 위험 성명서: H350i
• 예방조치 성명서: P201 - P202 - P280 - P308 + P313 - P405 - P501
• Hazard Classifications: Carc. 1B Inhalation
• Storage Class Code: 11 - Combustible Solids
• WGK: WGK 2