추천 제품
material
polyethersulfone filter (PES)
polyethylene support
polypropylene housing (PP)
silicon seal
Quality Level
규정 준수
meets FDA CFR 210.3 (b) (6) (all component materials)
무균
irradiated
non-sterile
멸균 적합성
gamma compatible
제품 라인
Opticap® XLT 30
특징
hydrophilic
파라미터
1.0 bar max. inlet pressure (15 psi) at 80 °C
1000 mbar max. differential pressure (15 psi) at 80 °C
2.75 bar max. inlet pressure (40 psi) at 60 °C
25 °C max. inlet temp.
5.5 bar max. inlet pressure (80 psi) at 25 °C
5500 mbar max. differential pressure (80 psi) at 25 °C
6.9 bar max. inlet pressure (100 psi) at 25 °C
76 L/min flow rate at 69 mbar (1 psi) and 23 °C
80 psig max. inlet pressure
기술
sterile filtration: suitable
너비
7.8 in.
카트리지 길이
34.3 in. (87.2 cm)
장치 크기
30 in. (75 cm)
필터 직경
2.7 in. (6.9 cm)
여과 면적
1.62 m2
불순물
≤0.25 EU/mL bacterial endotoxins (LAL test, aqueous extraction)
Matrix
Millipore Express® SHC
pore size
0.5/0.2 μm pore size
버블 포인트(bubble point)
≥4000 mbar (≥70 psig), air with water
피팅
1/4 in. fitting (vent/drain hose barb with double O-ring seal)
(38 mm (1 1/2 in.) Sanitary Flange Inlet and Outlet)
유사한 제품을 찾으십니까? 방문 제품 비교 안내
일반 설명
Device Configuration: Capsule
포장
제조 메모
3 autoclave cycles of 60 min @ 126 °C; capable of 45 kilogray (4.5 Megarad) gamma exposure; not in-line steam sterilizable
분석 메모
기타 정보
- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: BioProcessing
- Intended Use: Reduction or removal of microorganism/bioburden
- Instructions for Use: Please refer to wetting instructions of Filters with Millipore Express® Membrane use guide
- Storage Statement: Please refer to Filters with Millipore Express® Membrane user guide
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations
법적 정보
시험 성적서(COA)
제품의 로트/배치 번호를 입력하여 시험 성적서(COA)을 검색하십시오. 로트 및 배치 번호는 제품 라벨에 있는 ‘로트’ 또는 ‘배치’라는 용어 뒤에서 찾을 수 있습니다.
자사의 과학자팀은 생명 과학, 재료 과학, 화학 합성, 크로마토그래피, 분석 및 기타 많은 영역을 포함한 모든 과학 분야에 경험이 있습니다..
고객지원팀으로 연락바랍니다.