コンテンツへスキップ
Merck
  • Conversion of biomass-derived sorbitol to glycols over carbon-materials supported Ru-based catalysts.

Conversion of biomass-derived sorbitol to glycols over carbon-materials supported Ru-based catalysts.

Scientific reports (2015-11-19)
Xingcui Guo, Jing Guan, Bin Li, Xicheng Wang, Xindong Mu, Huizhou Liu
要旨

Ruthenium (Ru) supported on activated carbon (AC) and carbon nanotubes (CNTs) was carried out in the hydrogenolysis of sorbitol to ethylene glycol (EG) and 1,2-propanediol (1,2-PD) under the promotion of tungsten (WOx) species and different bases. Their catalytic activities and glycols selectivities strongly depended on the support properties and location of Ru on CNTs, owning to the altered metal-support interactions and electronic state of ruthenium. Ru located outside of the tubes showed excellent catalytic performance than those encapsulated inside the nanotubes. Additionally, the introduction of WOx into Ru/CNTs significantly improved the hydrogenolysis activities, and a complete conversion of sorbitol with up to 60.2% 1,2-PD and EG yields was obtained on RuWOx/CNTs catalyst upon addition of Ca(OH)2. Stability study showed that this catalyst was highly stable against leaching and poisoning and could be recycled several times.

材料
製品番号
ブランド
製品内容

Sigma-Aldrich
D-ソルビトール, ≥98% (GC)
Sigma-Aldrich
D-ソルビトール, BioUltra, ≥99.0% (HPLC)
Sigma-Aldrich
塩化ルテニウム(III) 水和物, 99.98% trace metals basis
Sigma-Aldrich
D-ソルビトール, 99% (GC)
Sigma-Aldrich
D-ソルビトール, ≥98% (GC), for molecular biology
Sigma-Aldrich
塩化ルテニウム(III) 水和物, 38.0-42.0% Ru basis
Sigma-Aldrich
D-ソルビトール, ≥98% (GC), BioReagent, suitable for cell culture, suitable for plant cell culture
Sigma-Aldrich
ルテニウム-炭素, extent of labeling: 5 wt. % loading
Sigma-Aldrich
ソルビトール F 溶液, 70 wt. % in H2O, Contains mainly D-sorbitol with lesser amounts of other hydrogenated oligosaccharides
Sigma-Aldrich
D-ソルビトール, FCC, FG
Sigma-Aldrich
ルテニウム, powder
Sigma-Aldrich
D-ソルビトール, ≥98% (GC), BioXtra
Sigma-Aldrich
ルテニウム, powder, −200 mesh, 99.9% trace metals basis
Sigma-Aldrich
ルテニウムブラック
ルテニウム, Ruthenium, foil, 6x6mm, thickness 1.0mm, 99.9%
ルテニウム, Ruthenium, pellets, 5g, max. size 10mm, 99.9%
ルテニウム, Ruthenium, foil, 25x25mm, thickness 1.0mm, 99.9%
ルテニウム, Ruthenium, bar, 50mm x 2mm x 2mm, 99.9%
ルテニウム, Ruthenium, foil, 10x10mm, thickness 1.0mm, 99.9%
ルテニウム, Ruthenium, bar, 25mm x 2mm x 2mm, 99.9%
ルテニウム, Ruthenium, rod, 12.7mm, diameter 12.7mm, 99.9%
ルテニウム, Ruthenium, microfoil, disks, 10mm, thinness 0.1μm, specific density 122μg/cm2, permanent mylar 3.5μm support, 99.9%
ルテニウム, Ruthenium, pellets, 2.5g, max. size 10mm, 99.9%
ルテニウム, Ruthenium, microfoil, disks, 10mm, thinness 0.025μm, specific density 30.5μg/cm2, permanent mylar 3.5μm support, 99.9%