コンテンツへスキップ
Merck
  • Incorporation of raloxifene-impregnated allograft around orthopedic titanium implants impairs early fixation but improves new bone formation.

Incorporation of raloxifene-impregnated allograft around orthopedic titanium implants impairs early fixation but improves new bone formation.

Acta orthopaedica (2014-09-02)
Lars L Hermansen, Mette Sørensen, Jeppe Barckman, Joan E Bechtold, Kjeld Søballe, Jørgen Baas
要旨

The anti-osteoporotic drug raloxifene reduces the risk of vertebral fractures by increasing bone mass density. We investigated whether raloxifene offers any benefits in augmenting early fixation of orthopedic implants in the setting of impaction bone grafting. 24 non-weight-bearing grafted gap implants were inserted bilaterally into the tibia of 12 dogs. The 2.5-mm peri-implant gap was filled with either raloxifene-impregnated or untreated bone allograft. Implants were harvested after 28 days. Implant fixation was assessed by mechanical testing and histomorphometric evaluation. Raloxifene-treated allograft reduced early implant fixation compared to untreated allograft, as measured by inferior maximum shear strength (p < 0.001) and apparent shear stiffness (p = 0.001). We found that the raloxifene group had more newly formed bone in the gap around the implant (p = 0.02), but also less allograft (p = 0.03). The accelerated allograft resorption in the raloxifene group explained the impaired early fixation, despite its stimulation of new bone formation. Our results with local and possible high-dose treatment are not consistent with current theory regarding the mechanism of how systemic raloxifene administration counteracts the decrease in BMD in postmenopausal women. Instead of being solely anti-resorptive as generally held, our results indicate a possible anabolic side of raloxifene.

材料
製品番号
ブランド
製品内容

Sigma-Aldrich
メタクリル酸メチル, contains ≤30 ppm MEHQ as inhibitor, 99%
Sigma-Aldrich
チタン, foil, thickness 0.127 mm, 99.7% trace metals basis
Sigma-Aldrich
チタン, powder, <45 μm avg. part. size, 99.98% trace metals basis
Sigma-Aldrich
チタン, foil, thickness 0.25 mm, 99.7% trace metals basis
Sigma-Aldrich
チタン, powder, −100 mesh, 99.7% trace metals basis
Sigma-Aldrich
トルイジンブルー, 8.74% (ZN (THEORY)), for microscopy (Hist., Vit.)
USP
ラロキシフェン 塩酸塩, United States Pharmacopeia (USP) Reference Standard
Sigma-Aldrich
チタン, wire, diam. 0.25 mm, 99.7% trace metals basis
Sigma-Aldrich
チタン, sponge, 1-20 mm, 99.5% trace metals basis
チタン, mesh, 100x100mm, nominal aperture 0.19mm, wire diameter 0.23mm, 60x60 wires/inch, open area 20%, twill weave
Sigma-Aldrich
ラロキシフェン 塩酸塩, solid
Sigma-Aldrich
チタン, foil, thickness 0.025 mm, 99.98% trace metals basis
Sigma-Aldrich
チタン, foil, thickness 2.0 mm, 99.7% trace metals basis
チタン, mesh, 100x100mm, nominal aperture 4.3mm, wire diameter 1.5mm, 4.4x4.4 wires/inch, open area 94%, platinized diamond mesh
Sigma-Aldrich
チタン, foil, thickness 0.5 mm, 99.99% trace metals basis
Sigma-Aldrich
チタン, sputtering target, diam. × thickness 2.00 in. × 0.25 in., 99.995% trace metals basis
Sigma-Aldrich
チタン, wire, diam. 1.0 mm, 99.99% trace metals basis
Sigma-Aldrich
チタン, foil, thickness 0.25 mm, 99.99% trace metals basis
Sigma-Aldrich
チタン, foil, thickness 0.127 mm, ≥99.99% trace metals basis
Sigma-Aldrich
チタン, 5-10 mm, ≥99.99% trace metals basis (purity exclusive of Na and K content)
Sigma-Aldrich
チタン, wire, diam. 0.5 mm, 99.99% trace metals basis
チタン, wire, straight, 1000mm, diameter 1.0mm, as drawn, 99.6+%
チタン, rod, 10mm, diameter 50mm, 99.99+%
チタン, tube, 1000mm, outside diameter 10.3mm, inside diameter 8.7mm, wall thickness 0.8mm, annealed, 99.6+%
Sigma-Aldrich
チタン, evaporation slug, diam. × L 6.3 mm × 6.3 mm, ≥99.99% trace metals basis
チタン, tube, 200mm, outside diameter 2.03mm, inside diameter 1.63mm, wall thickness 0.2mm, annealed, 99.6+%
Sigma-Aldrich
メタクリル酸メチル, SAJ first grade, ≥99.0%
Sigma-Aldrich
チタン, wire, diam. 0.81 mm, 99.7% trace metals basis
チタン, tube, 500mm, outside diameter 1.6mm, inside diameter 1.2mm, wall thickness 0.2mm, hard, 99.6+%
チタン, tube, 100mm, outside diameter 0.51mm, inside diameter 0.35mm, wall thickness 0.08mm, annealed, 99.6+%