コンテンツへスキップ
Merck

Removal of polyvinylpyrrolidone from wastewater using different methods.

Water environment research : a research publication of the Water Environment Federation (2013-01-25)
Markéta Julinová, Jan Kupec, Josef Houser, Roman Slavík, Hana Marusincová, Lenka Cervenáková, Stanislav Klívar
要旨

Polyvinylpyrrolidone (PVP) is a frequently used polymer in the pharmaceutical and foodstuff industries. Because it is not subject to metabolic changes and is virtually nondegradable, trace concentrations of PVP are often found in community wastewaters. The literature finds that the partial removal of PVP in wastewater treatment plants probably occurs through sorption. The primary objective of this study was to find an effective method to remove PVP from wastewaters. In this regard, the literature indicates the theoretical potential to use specific enzymes (e.g., gamma-lactamases, amidases) to gradually degrade PVP molecules. Polyvinylpyrrolidone biodegradability tests were conducted using suitable heterogeneous cultures (activated sludge) collected from a conventional wastewater treatment plant, treatment plants connected to a pharmaceutical factory, and using select enzymes. Aerobic biodegradation of PVP in a conventional wastewater environment was ineffective, even after adaptation of activated sludge using the nearly identical monomer 1-methyl-2-pyrrolidone. Another potential method for PVP removal involves pretreating the polymer prior to biological degradation. Based on the results (approximately 10 to 15% biodegradation), pretreatment was partially effective, realistically, it could only be applied with difficulty at wastewater treatment plants. Sorption of PVP to an active carbon sorbent (Chezacarb S), which corresponded to the Langmuir isotherm, and sorption to activated sludge, which corresponded to the Freundlich isotherm, were also evaluated. From these sorption tests, it can be concluded that the considerable adsorption of PVP to activated sludge occurred primarily at low PVP concentrations. Based on the test results, the authors recommend the following methods for PVP removal from wastewater: (1) sorption; (2) application of specific microorganisms; and (3) alkaline hydrolysis, which is the least suitable of the three for use in wastewater treatment plants.

材料
製品番号
ブランド
製品内容

Sigma-Aldrich
ポリビニルピロリドン, average mol wt 40,000
Sigma-Aldrich
ポリビニルピロリドン, mol wt (number average molecular weight Mn 360kDa)
Sigma-Aldrich
ポリビニルピロリドン, average Mw ~1,300,000 by LS
Sigma-Aldrich
ポリビニルピロリドン, powder, average Mw ~55,000
Sigma-Aldrich
ポリビニルピロリドン, powder, average Mw ~29,000
Sigma-Aldrich
ポリビニルピロリドン, powder, BioXtra, suitable for mouse embryo cell culture
Sigma-Aldrich
ポリビニルピロリドン, average mol wt 10,000
Sigma-Aldrich
ポリビニルピロリドン, K 30
Sigma-Aldrich
ポリビニルピロリドン, K 90
Sigma-Aldrich
ポリビニルピロリドン 溶液, K 60, 45% in H2O
Sigma-Aldrich
Kollidon® 25
Sigma-Aldrich
ポリビニルピロリドン, CP, Mw 1200000, K 90, 11.5-12.8% N basis
Sigma-Aldrich
ポリビニルピロリドン, for molecular biology, nucleic acid hybridization tested, mol wt 360,000
Sigma-Aldrich
Povidone, meets USP testing specifications
Supelco
ポリビニルピロリドン, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
ポリビニルピロリドン, K 25, tested according to Ph. Eur.
Sigma-Aldrich
ポリビニルピロリドン, suitable for plant cell culture, average mol wt 10,000
ポリビニルピロリドン, European Pharmacopoeia (EP) Reference Standard