現在、価格および在庫状況を閲覧できません。
おすすめの製品
物質
PVDF
silicone gasket
品質水準
特徴
hydrophilic
メーカー／製品名
Prostak™
パラメーター
2.1 bar max. transmembrane pressure (30 psi) at 50-80 °C
4.1 bar max. inlet pressure (60 psi) at 50-80 °C
4.1 bar max. transmembrane pressure (60 psi) at 50 °C
5.5 bar max. inlet pressure (80 psi) at 50 °C
dilution
(concentration and clarification)
H
8.1 cm (3.2 in.)
L
38.9 cm (15.3 in.)
W
19.8 cm (7.8 in.)
デバイスサイズ
, 10 stack
ろ過面積
0.84 m2
Membrane nominal area
0.84 m2
重量
3.6 kg (7.9 lb)
Matrix
Durapore®
ポアサイズ
0.22 μm nominal pore size
0.22 μm pore size
pH
1-11(short duration)
2-10(continuous)
類似した製品をお探しですか？ 訪問 製品比較ガイド
詳細
Prostak™ MF Module 0.22 μm 10 stack 0.84 m ² are a tangential flow filtration device in a stacked plate configuration with Type V screen open feed channel. A microporous membrane, Durapore® polyvinylidene fluoride (PVDF), is bonded on both sides of each plate. The plates are then stacked in parallel forming stacks.
This Prostak™ microfiltration open-channel module features a Pore Size of 0.22 μm and a filtration area of 0.84 m2. PSGVAG101 is available in a 10 stack, making it applicable for bench-top, pilot, and production scale systems.
The modules can be integrity tested and steam sterilized for 20 cycles.
Prostak™ MF modules must be used with a support holder, which controls deflection and provides sanitary fittings for connection to external piping. Sanitary gaskets supplied with the module provide a leak-free connection between the module(s) and the holder.
This Prostak™ microfiltration open-channel module features a Pore Size of 0.22 μm and a filtration area of 0.84 m2. PSGVAG101 is available in a 10 stack, making it applicable for bench-top, pilot, and production scale systems.
The modules can be integrity tested and steam sterilized for 20 cycles.
Prostak™ MF modules must be used with a support holder, which controls deflection and provides sanitary fittings for connection to external piping. Sanitary gaskets supplied with the module provide a leak-free connection between the module(s) and the holder.
アプリケーション
Typical Applications
Prostak™ microfiltration is used for separations where viscosity and suspended solids levels of the feed stream require an open feed channel. They are typically used in perfusion applications or in the clarification/harvest of:
Prostak™ microfiltration is used for separations where viscosity and suspended solids levels of the feed stream require an open feed channel. They are typically used in perfusion applications or in the clarification/harvest of:
- Mammalian, bacterial and mycelial cell suspensions
- Emulsions and colloidal suspension
- Viruses, proteins and other bio-organic macromolecular solutions
- Polysaccharides and other high viscosity solutions
- Yeast, algae, and other high solids suspensions
- Protein precipitate
- Vaccines
特徴および利点
Type V screen open feed channel
その他情報
これらの製品はFDAの定めたGMP準拠の製造工場で製造されています。
Prefiltration Rquirements: 150 µm
法的情報
Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany
Prostak is a trademark of Merck KGaA, Darmstadt, Germany
試験成績書（COA）
製品のロット番号・バッチ番号を入力して、試験成績書（COA） を検索できます。ロット番号・バッチ番号は、製品ラベルに「Lot」または「Batch」に続いて記載されています。
アクティブなフィルタ
ライフサイエンス、有機合成、材料科学、クロマトグラフィー、分析など、あらゆる分野の研究に経験のあるメンバーがおります。.
製品に関するお問い合わせはこちら（テクニカルサービス）
