CW03N4S03

Milligard^® 0.2 µm（公称）、カートリッジ

cartridge nominal length 4 in. (10 cm), filter diam. 2.8 in. (7.1 cm)

• UNSPSCコード: 23151806

特性

• 物質: polyester support; polypropylene device; silicone seal
• 品質水準: 400
• 法規制遵守: meets EU 1935/2004/EC (alll component materials); meets FDA 21 CFR 177-182 (all component materials)
• 無菌性: non-sterile
• 滅菌適合性: autoclavable compatible; steam-in-place compatible
• 製品種目: Milligard^®
• 特徴: hydrophilic
• メーカー／製品名: Milligard^®
• パラメーター: 3.5 bar max. differential pressure (50 psid) at 25 °C; 3.5 bar max. inlet pressure (50 psi) at 25 °C
• テクニック: prefiltration: suitable
• L: 4 in.
• W: 2.9 in.
• カートリッジの長さ（公称）: 4 in. (10 cm)
• フィルタ直径: 2.8 in. (7.1 cm)
• フィルタサイズ: 4 in.
• ろ過面積: 0.34 m²
• 不純物: ≤0.5 EU/mL bacterial endotoxins (LAL test, aqueous extraction); <0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
• マトリックス: Milligard^®
• ポアサイズ: 0.2 μm nominal pore size; 0.2 μm pore size
• カートリッジコード: Code N

詳細

詳細

Cartridge Type: Liquid

Device Configuration: Cartridge

Filter Grade: Standard MILLIGARD^® Media

特徴および利点

Format: Single Layer

包装

Double Easy-Open bag

調製ノート

Sterilization Method: 10 autoclave cycles or SIP at 121 °C for 30 min

This product was manufactured with a media combination which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

アナリシスノート

Gravimetric Extractables: The extractables level was ≤20 mg per 4-inch cartridge after 24 hours in water at controlled room temperature.   

その他情報

Directions for Use:

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer installation and wetting sections of OPTISCALE^® -25 user guide and introduction section of Mixed cellulose esters Tech Brief
• Storage Statement: Please refer Mixed cellulose esters Tech Brief
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

法的情報

MILLIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

OptiScale is a registered trademark of Merck KGaA, Darmstadt, Germany