Passa al contenuto
Merck
Tutte le immagini(1)

Documenti fondamentali

Visualizza tutta la documentazione

1.19781

Supelco

Iron standard solution

traceable to SRM from NIST Fe(NO₃)₃ in HNO₃ 0.5 mol/l 1000 mg/l Fe Certipur®

Sinonimo/i:

Iron Calibration Standard for ICP/AAS

Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali

Scegli un formato

100 ML
52,50 €
500 ML
73,50 €

52,50 €

Spedizione prevista il02 aprile 2025Dettagli

Richiedi un ordine bulk
Tutte le immagini(1)

Scegli un formato

Cambia visualizzazione
100 ML
52,50 €
500 ML
73,50 €

About This Item

Codice UNSPSC:
41116107
NACRES:
NA.24

52,50 €

Spedizione prevista il02 aprile 2025Dettagli

Richiedi un ordine bulk

Grado

certified reference material

Livello qualitativo

300

agenzia

suitable for EPA 200.7

Nome Commerciale

Certipur®

Concentrazione

1000 mg/L Fe in 0.5 M HNO3

tecniche

AAS: suitable

pH

0.5 (20 °C in H2O)

Densità

1.015 g/cm3 at 20 °C

applicazioni

industrial qc
pharmaceutical

Formato

single component solution

Temperatura di conservazione

15-25°C

Categorie correlate

Descrizione generale

This certified reference material (CRM) is produced in accordance with ISO 17034 and characterized in accordance with ISO/IEC 17025. This CRM is traceable to SI unit kg and measured against primary material from a National Metrology Institute (NMI), e.g. NIST.

Please visit ISO certificates and Site Quality Self-Assessments to access the current certificates of accreditation.

Download your certificate at http://www.sigma-aldrich.com to view certified values, including uncertainty and expiry date.

Applicazioni

Iron standard solution may be used as a calibration standard in the determination of iron in roumanian wine by flame atomic absorption spectroscopy.[1]

Risultati analitici

1000 mg/L Fe in 0.5 mol/L HNO3, prepared with high-purityFe(NO3)3, HNO3, and water

Altre note

For a complete product listing of our Certipur® range of CRMs for ICP and AAS, technical information, and example certificates please visit our ICP & AAS standards website

Note legali

CERTIPUR is a registered trademark of Merck KGaA, Darmstadt, Germany

Pittogrammi

Corrosion
GHS05

Avvertenze

Warning

Indicazioni di pericolo

H290,H315,H319

Classi di pericolo

Eye Irrit. 2 - Met. Corr. 1 - Skin Irrit. 2

Codice della classe di stoccaggio

8B - Non-combustible corrosive hazardous materials

Classe di pericolosità dell'acqua (WGK)

nwg

Certificati d'analisi (COA)

Cerca il Certificati d'analisi (COA) digitando il numero di lotto/batch corrispondente. I numeri di lotto o di batch sono stampati sull'etichetta dei prodotti dopo la parola ‘Lotto’ o ‘Batch’.

Possiedi già questo prodotto?

I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.

Visita l’Archivio dei documenti

I clienti hanno visto anche

Slide 1 of 7

1 of 7

Iron(III) chloride solution (10% Fe) for analysis EMSURE®

Supelco

1.05512

Iron(III) chloride solution (10% Fe)

Zinc standard solution traceable to SRM from NIST Zn(NO₃)₂ in HNO₃ 0.5 mol/l 1000 mg/l Zn Certipur®

Supelco

1.19806

Zinc standard solution

Potassium standard solution traceable to SRM from NIST KNO₃ in HNO₃ 0.5 mol/l 1000 mg/l K Certipur®

Supelco

1.70230

Potassium standard solution

Lead standard solution traceable to SRM from NIST Pb(NO₃)₂ in HNO₃ 0.5 mol/l 1000 mg/l Pb Certipur®

Supelco

1.19776

Lead standard solution

Aluminium standard solution traceable to SRM from NIST Al(NO₃)₃ in HNO₃ 0.5 mol/l 1000 mg/l Al Certipur®

Supelco

1.19770

Aluminium standard solution

Chromium standard solution traceable to SRM from NIST Cr(NO₃)₃ in HNO₃ 0.5 mol/l 1000 mg/l Cr Certipur®

Supelco

1.19779

Chromium standard solution

Magnesium standard solution traceable to SRM from NIST Mg(NO₃)₂ in HNO₃ 0.5 mol/l 1000 mg/l Mg Certipur®

Supelco

1.19788

Magnesium standard solution

The validation of the method for iron determination from roumanian wines, using flame atomic absorption spectrometry
Artimon M, et al.
Rev. Roum. Chim., 54, 247-254 (2009)
Mojtaba Abdollahi et al.
Archives of animal nutrition, 74(3), 189-205 (2019-12-19)
This study was conducted to assess the effect of feeding high-surface ZnO instead of common ZnO on the performance, rumen fermentation, blood minerals, leukocytes and antioxidant capacity of pre- and post-weaning calves. Thirty male suckling Holstein calves were allotted to

Articoli

Determinazione di precisione del ferro nelle acque potabili, in quelle minerali, di falda, di superficie e di sorgente mediante test fotometrici rapidi

Test del ferro Spectroquant® - una valida alternativa ai metodi ICP o AAS per la determinazione del ferro nelle acque potabili, in quelle minerali, di falda e di sorgente.

Sensitive Determination of Iron in Drinking Water, Mineral Water, Groundwater, and Spring Water Using Rapid Photometric Tests

Spectroquant® Iron Test - a suitable alternative to ICP or AAS for determination of iron in drinking water, mineral water, groundwater, and spring water.

Contenuto correlato

Environmental Methods Consumables Look Up Tool

This page is intended to make it easier to find the consumables you need based on the analytical method you’re using. Methods included on this page come from the EPA, Standard Methods and ASTM.

Domande

1–2 di 2 domande  

  1. How can I determine the shelf life / expiration / retest date of this product?

    1 risposta

    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdf

      Utile?

  2. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 risposta

    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      Utile?

Recensioni

Nessuna valutazione

Filtri attivi

Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..

Contatta l'Assistenza Tecnica.