A convenient tubing connection system for use with DURAN® GL 25 laboratory and media bottles. The bottle top adaptor facilitates the transfer of liquids within a closed and sterile system. The caps feature a GL 25 thread that fits 10 or 25 mL DURAN® bottles, and are available with two tubing connectors. The barbed male tubing connector are made from a 316L stainless steel and will fit tubing with a 3.2 mm (1/8”) inner diameter. High temperature resistance (up to 180 °C). The caps are fully autoclavable (121 °C / 15 minutes) and reusable.
Applicazioni
Low volume sampling
Media supply for small bioreactors
Fed-batch bioreactor
Perfusion circuit for cell culture
Oxygenation / aeration of very small samples
Use in a chemistry micro-reactor
Caratteristiche e vantaggi
Caps have a GL 25 thread that fit the smaller 10 or 25 ml DURAN bottles
Barbed male hose connector are suitable for tubing with a 3.2 mm (1/8 in.) inner diameter
Available with 2, 3, or 4 surgical grade stainless steel (316L) barbed tubing ports
Construction materials are certified as approved for food contact
High temperature resistance up to 180°C
Autoclavable at 121°C / 15 minutes
Reusable with a long service life
Note legali
DURAN is a registered trademark of DWK Life Sciences
Scegli una delle versioni più recenti:
Certificati d'analisi (COA)
Lot/Batch Number
It looks like we've run into a problem, but you can still download Certificates of Analysis from our Documenti section.
Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..