推荐产品
材料
PVDF vent cap
fluoroelastomer FKM seal
polycarbonate
polyethersulfone
polypropylene support
品質等級
法律遵循
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
無菌
non-sterile
滅菌相容性
autoclavable compatible
產品線
OptiScale® 47
特點
hydrophilic
製造商/商標名
Millipore Express®
參數
25 °C max. inlet temp.
5.5 bar max. inlet pressure (80 psi) at 25 °C
80 psig max. inlet pressure
技術
sterile filtration: suitable
長度
9.4 cm (3.70 in.)
寬度
2.75 in.
柱標稱長度
3.70 in. (94 mm)
直徑
6.9 cm (2.7 in.)
過濾面積
17.7 cm2
入口接頭直徑
1/4 in.
出口接頭直徑
1/4 in.
基質
Millipore Express® SHR (w/Prefilter)
pore size
0.5/0.1 μm pore size
起泡點
≥2586 mbar (37.5 psig), nitrogen with 70/30% IPA/water at 23 °C
接頭
inlet hose barb
outlet hose barb
(6 mm (1/4 in.) Hose Barb Inlet and Outlet)
一般說明
Device Configuration: 取样皿滤膜
其他說明
These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Directions for Use
- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: BioProcessing
- Intended Use: Reduction or removal of microorganism/bioburden
- Instructions for Use: Please refer installation and wetting sections of OPTISCALE®-25 user guide
- Storage Statement: Please refer to OPTISCALE®-25 user guide
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
準備報告
Sterilization Method
3 autoclave cycles of 60 min @ 126 °C
3 autoclave cycles of 60 min @ 126 °C
分析報告
Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥100 mL
法律資訊
MILLIPORE EXPRESS is a registered trademark of Merck KGaA, Darmstadt, Germany
OptiScale is a registered trademark of Merck KGaA, Darmstadt, Germany
未找到合适的产品?
试试我们的产品选型工具.
我们的科学家团队拥有各种研究领域经验,包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.
联系技术服务部门