推荐产品
材料
PVDF
polypropylene
polypropylene housing
polypropylene support
polypropylene vent cap
silicone seal
品質等級
法律遵循
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
無菌
non-sterile
滅菌相容性
autoclavable compatible
產品線
Opticap® XL 5
特點
hydrophilic
製造商/商標名
Opticap®
參數
≤7.5 mL/min air diffusion at 1.5 bar (22 psig) and 23 °C (in water)
1.0 bar max. inlet pressure (15 psi) at 80 °C
2.8 bar max. inlet pressure (40 psi) at 60 °C
25 °C max. inlet temp.
3.4 bar max. differential pressure (50 psid) at 25 °C (Forward)
3.4 bar max. differential pressure (50 psid) at 25 °C (Reverse; intermittent)
5.5 bar max. inlet pressure (80 psi) at 23 °C
80 psig max. inlet pressure
技術
bioburden reduction: suitable
長度
8.5 in.
寬度
4.2 in.
柱標稱長度
5 in. (12.5 cm)
直徑
10.7 cm (4.2 in.)
過濾面積
0.35 m2
入口接頭直徑
3/4 in.
入口到出口寬度
21.1 cm (8.3 in.)
出口接頭直徑
3/4 in.
雜質
≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
<0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
重量法萃取物
≤15 mg/capsule
基質
Durapore®
孔徑
0.45 μm
輸入
sample type liquid
起泡點
≥1930 mbar (28 psig), air with water at 23 °C
接頭
1/4 in. drain/vent hose barb (with double O-ring Seal)
inlet sanitary flange
outlet sanitary flange
(19 mm (3/4 in.) Sanitary Flange Inlet and Outlet)
一般說明
包裝
其他說明
- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: BioProcessing
- Intended Use: Reduction or removal of microorganism/bioburden
- Instructions for Use: Please refer Wetting Instructions for Filter Units with Durapore® Membrane user guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
準備報告
3 autoclave cycles of 60 min @ 126 °C; not in-line steam sterilizable
分析報告
法律資訊
免責聲明
未找到合适的产品?
试试我们的产品选型工具.
我们的科学家团队拥有各种研究领域经验,包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.
联系技术服务部门