PCC030C01C

Capsule Pellicon^® avec membrane Ultracel^®

pore size 30 kDa, C Screen, size 0.1 m² , with AseptiQuik^® G connectors

• Code UNSPSC : 41104903

Propriétés

• Matériaux: EPDM rubber seal; PPO/PS blend (core); PPO/PS blend housing; TPE seal; Ultracel^® membrane; composite regenerated cellulose (CRC) membrane; epoxy adhesive; polyester screen; polypropylene screen; polyurethane adhesive
• Niveau de qualité: 400
• Stérilité: sterile; γ-irradiated
• Gamme de produits: Pellicon^®
• Conditions de stockage: room temperature (15-30°C)
• Paramètres: 4-8 L/min-m² flow rate (Feed); 50 psi max. transmembrane pressure (3.5 bar) at 4-30 °C (Forward); 75 psi max. inlet pressure (5.1 bar) at 4-30 °C
• Technique(s): ultrafiltration: suitable
• Longueur: 41.1 cm (16.2 in.)
• Diamètre: 3.8 cm (1.5 in.)
• Surface de filtration: 0.1 m²
• Taille de l'écran: , Type C screen (coarse screen)
• Taille: 0.1 m² , with AseptiQuik^® G connectors
• Volume: 38 mL , in feed channel; 68 mL , in permeate channel
• Impuretés: ≤5 ppm Meets TOC (in retentate effluent, after a WFI flush of 20 L/m²)
• Matrice: Ultracel^®
• Dimension de pores: 30 kDa
• Plage de pH: 2-13
• Raccords: inlet/outlet connection (Feed: AseptiQuik^® G Connector); inlet/outlet connection (Permeate: AseptiQuik^® G Connector); inlet/outlet connection (Retentate: AseptiQuik^® G Connector)

Description

Description générale

The Pellicon^® Capsule is the first of its kind -- a true single-use TFF device that comes ready to process in minutes. Self-contained, it employs an easy-to-use, holderless format and is supplied sterilized by irradiation.

Application

Concentration, Diafiltration, Buffer exchange, Protein purification

Caractéristiques et avantages

Plug ′n play, holderless design - easy to install, safe to remove
Gamma sterilized and preseravtive-free - ready to process in minutes
True single-use, self-contained capusle - fast, safe, and flexible batch turnaround
Proven Ultracel^® membrane and C screen - high recovery, superior mass transfer, solvent resistance
Pellicon^® TFF proven performance - true linear scalability within Pellicon^® TFF families

Conditionnement

A foam pouch is inserted over the end caps on both ends of the capsule which is then double-bagged and vacuum sealed. The double-bagged capsule is then placed on a tray and individually boxed.

Autres remarques

The Emprove^® Program complements the product portfolio through

Comprehensive documentation to support qualification, risk assessment and process optimization needs.
Consolidation of product specific testing, quality and regulatory information to simplify compliance requirements.
Convenient 24/7 access to up-to-date product information.

Informations légales

AseptiQuik is a registered trademark of Colder Products Company

Emprove is a registered trademark of Merck KGaA, Darmstadt, Germany

Pellicon is a registered trademark of Merck KGaA, Darmstadt, Germany

ULTRACEL is a registered trademark of Merck KGaA, Darmstadt, Germany