When using polycarbonate bottles, it is recommended to autoclave and/or use radiation for sterilization. Before autoclaving, it is important to thoroughly rinse the products to avoid crazing and spotting caused by detergent residues. The autoclaving cycles should be limited to 20 minutes at 121°C, as repeated autoclaving can lead to a loss of mechanical strength, affecting its performance under high-stress applications such as centrifugation. It is not advisable to expose these vessels to high stresses such as vacuum application or centrifugation. Dishwashers can be used with all resins, except for LLDPE, acrylic, and PS, due to temperature limitations. The maximum recommended use temperature for polycarbonate is 115°C - 138°C. Repeated washing of polycarbonate vessels in the dishwasher can weaken the strength of the bottles. Detailed information and recommendations on autoclaving and a table of resin properties with recommended sterilization methods can be found in our Nalgene technical guide, specifically on page 16 and 19.
TMO383423-42
Nalgene® Certified Clean Biotainer(TM) Carboys
polycarbonate, volume 20 L, case of 3 ea
Sinónimos:
biotainer carboy, certified nalgene carboy, sterile carboy
Seleccione un Tamaño
796,00 €
Seleccione un Tamaño
About This Item
796,00 €
Productos recomendados
Materiales
polycarbonate
envase
case of 3 ea
fabricante / nombre comercial
Nalgene 383423-42
volumen
20 L
20000 mL
¿Está buscando productos similares? Visita Guía de comparación de productos
Categorías relacionadas
Descripción general
Características y beneficios
- Provided sterile and ready-to-use; including certified clean products, which meet USP<788> standards and endotoxins below 0.5 EU/mL
- Certified clean products include triple layer packaging, with two heat-sealed layers to facilitate ease of entry into cleanrooms
- Sterility Assurance Level of 10-6 inside the bottle/closure
- Robust, PC can be used from -100°C to 100°C, allowing for both heated mixing and frozen storage or shipment. Must be tested in actual use conditions as results may vary depending upon application.
- Inspection procedures throughout manufacturing include leak testing, dimensional testing, visual inspection for particulates and release testing to ensure the product meets all specifications.
- All container/closure systems are certified leakproof** to protect valuable contents
Información legal
Elija entre una de las versiones más recientes:
Certificados de análisis (COA)
It looks like we've run into a problem, but you can still download Certificates of Analysis from our Documentos section.
Si necesita más asistencia, póngase en contacto con Atención al cliente
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
-
Can you provide information on the sterilization method for product TMO383423-42?
1 respuesta-
¿Le ha resultado útil?
-
Filtros activos
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico
