Saltar al contenido
Merck

71687

Sigma-Aldrich

Hidróxido de sodio

BioUltra, for luminescence, ≥98.0% (T), pellets

Sinónimos:

«Sosa cáustica»

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización

Seleccione un Tamaño

100 G
33,60 €
500 G
105,00 €

33,60 €


Póngase en contacto con nuestro Servicio de Atención al Cliente para disponibilidad

Solicitar un pedido a granel

Seleccione un Tamaño

Cambiar Vistas
100 G
33,60 €
500 G
105,00 €

About This Item

Fórmula lineal:
NaOH
Número de CAS:
Peso molecular:
40.00
Número CE:
Número MDL:
Código UNSPSC:
12352316
ID de la sustancia en PubChem:
NACRES:
NA.32
grado:
for luminescence

33,60 €


Póngase en contacto con nuestro Servicio de Atención al Cliente para disponibilidad

Solicitar un pedido a granel

grado

for luminescence

Nivel de calidad

densidad de vapor

>1 (vs air)

presión de vapor

<18 mmHg ( 20 °C)
3 mmHg ( 37 °C)

Línea del producto

BioUltra

Ensayo

≥98.0% (T)

Formulario

pellets

técnicas

cell culture | mammalian: suitable

impurezas

insoluble matter, passes filter test
≤0.0003% total nitrogen (N)
≤0.0005% silicon dioxide (SiO2)
≤1.0% sodium carbonate (Na2CO3)

mp

318 °C (lit.)

solubilidad

H2O: 1 M at 20 °C, clear, colorless

densidad

2.13 g/cm3

trazas de anión

chloride (Cl-): ≤70 mg/kg
phosphate (PO43-): ≤5 mg/kg
sulfate (SO42-): ≤50 mg/kg

trazas de catión

Ag: ≤5 mg/kg
Al: ≤5 mg/kg
As: ≤0.1 mg/kg
Ba: ≤5 mg/kg
Bi: ≤5 mg/kg
Ca: ≤10 mg/kg
Cd: ≤5 mg/kg
Co: ≤5 mg/kg
Cr: ≤5 mg/kg
Cu: ≤5 mg/kg
Fe: ≤5 mg/kg
Hg: ≤0.1 mg/kg
K: ≤500 mg/kg
Li: ≤5 mg/kg
Mg: ≤5 mg/kg
Mn: ≤5 mg/kg
Mo: ≤5 mg/kg
Ni: ≤5 mg/kg
Pb: ≤5 mg/kg
Sr: ≤5 mg/kg
Zn: ≤5 mg/kg

cadena SMILES

[OH-].[Na+]

λ

1 M in H2O

Absorción UV

λ: 260 nm Amax: 0.015
λ: 280 nm Amax: 0.01

idoneidad

in accordance for luminescence

InChI

1S/Na.H2O/h;1H2/q+1;/p-1

Clave InChI

HEMHJVSKTPXQMS-UHFFFAOYSA-M

¿Está buscando productos similares? Visita Guía de comparación de productos

Descripción general

Sodium Hydroxide, also known as caustic soda or lye, is a white crystalline odorless solid which is corrosive and absorbs moisture from the air. When dissolved in water, Sodium Hydroxide generates heat to ignite combustible materials. In the form of pellets, Sodium Hydroxide, when dissolved, forms a colorless liquid, denser than water.

Aplicación

Sodium Hydroxide is generally used in the solid or 50% solution form. It is suitable for use at various stages of soaps, paper, rayon, and petroleum product manufacturing. It is also used in carbohydrate research using FTIR analysis.[1] Sodium Hydroxide is used as a pre-treatment reagent to study enzymatic hydrolysis.[2]

¿No encuentra el producto adecuado?  

Pruebe nuestro Herramienta de selección de productos.

Pictogramas

Corrosion

Palabra de señalización

Danger

Frases de peligro

Clasificaciones de peligro

Eye Dam. 1 - Met. Corr. 1 - Skin Corr. 1A

Código de clase de almacenamiento

8B - Non-combustible corrosive hazardous materials

Clase de riesgo para el agua (WGK)

WGK 1

Punto de inflamabilidad (°F)

Not applicable

Punto de inflamabilidad (°C)

Not applicable

Equipo de protección personal

Eyeshields, Faceshields, Gloves, type P3 (EN 143) respirator cartridges


Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Los clientes también vieron

Ziyu Wang et al.
Bioresource technology, 101(10), 3583-3585 (2010-01-22)
Coastal Bermuda grass was pretreated with NaOH at concentrations from 0.5% to 3% (w/v) for a residence time from 15 to 90min at 121 degrees C. The pretreatments were evaluated based on total lignin removal and production of total reducing
Sang Youn Oh et al.
Carbohydrate research, 340(3), 417-428 (2005-02-01)
Cellulose samples treated with sodium hydroxide (NaOH) and carbon dioxide in dimethylacetamide (DMAc) were analyzed by FTIR spectroscopy. Absorbance of hydrogen-bonded OH stretching was considerably decreased by the treatment of NaOH and carbon dioxide. The relative absorbance ratio (A(4000-2995)/A(993)) represented
Konstantinos A Polyzos et al.
Cardiovascular research, 106(2), 295-302 (2015-03-10)
Atherosclerosis is a chronic inflammatory disease that is initiated by the retention and accumulation of low-density lipoprotein in the artery, leading to maladaptive response of cells from the immune system and vessel wall. Strong evidence implicates indoleamine 2,3-dioxygenase (IDO), the
C Berger et al.
Human reproduction (Oxford, England), 30(4), 800-811 (2015-03-06)
Does ulipristal acetate (UPA) used for emergency contraception (EC) interfere with the human embryo implantation process? UPA, at the dosage used for EC, does not affect human embryo implantation process, in vitro. A single pre-ovulatory dose of UPA (30 mg)
Jesper Hjortnaes et al.
Advanced healthcare materials, 4(1), 121-130 (2014-06-25)
Three dimensional (3D) hydrogel platforms are powerful tools, providing controllable, physiologically relevant microenvironments that could aid in understanding how various environmental factors direct valvular interstitial cell (VIC) phenotype. Continuous activation of VICs and their transformation from quiescent fibroblast to activated

Preguntas

Revisiones

Sin puntuación

Filtros activos

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico