Saltar al contenido
Merck
Todas las fotos(2)

Documentos

203556

Sigma-Aldrich

Lanthanum(III) oxide

99.999% trace metals basis

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Todas las fotos(2)

About This Item

Fórmula lineal:
La2O3
Número de CAS:
1312-81-8
Peso molecular:
325.81
Número CE:
215-200-5
Número MDL:
MFCD00011071
Código UNSPSC:
12352303
ID de la sustancia en PubChem:
24852180
NACRES:
NA.23

Análisis

99.999% trace metals basis

formulario

powder

idoneidad de la reacción

reagent type: catalyst
core: lanthanum

densidad

6.51 g/mL at 25 °C (lit.)

aplicaciones

battery manufacturing

cadena SMILES

O=[La]O[La]=O

InChI

1S/2La.3O

Clave InChI

KTUFCUMIWABKDW-UHFFFAOYSA-N

¿Está buscando productos similares? Visita Guía de comparación de productos

Categorías relacionadas

Aplicación

Precursor to LAMOX fast ion conductors and superconductors.

Código de clase de almacenamiento

13 - Non Combustible Solids

Clase de riesgo para el agua (WGK)

WGK 3

Punto de inflamabilidad (°F)

Not applicable

Punto de inflamabilidad (°C)

Not applicable

Equipo de protección personal

dust mask type N95 (US), Eyeshields, Gloves

Certificados de análisis (COA)

Busque Certificados de análisis (COA) introduciendo el número de lote del producto. Los números de lote se encuentran en la etiqueta del producto después de las palabras «Lot» o «Batch»

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Lixia Wang et al.
Journal of hazardous materials, 196, 342-349 (2011-09-29)
This investigation was to increase the adsorption capacity of magnetite for Congo red (CR) by adulterating a small quantity of La(3+) ions into it. The adsorption capability of nanocrystalline Fe(3-x)La(x)O(4) (x=0, 0.01, 0.05, 0.10) ferrite to remove CR from aqueous
Hui Sun et al.
Bioresource technology, 101(3), 953-958 (2009-09-22)
ZrO(2) supported La(2)O(3) catalyst prepared by impregnation method was examined in the transesterification reaction of sunflower oil with methanol to produce biodiesel. It was found that the catalyst with 21 wt% loaded La(2)O(3) and calcined at 600 degrees C showed
Lukas C Gerber et al.
Chemical communications (Cambridge, England), 48(32), 3869-3871 (2012-03-14)
Lanthanum oxide nanoparticles were utilized to scavenge phosphate from microbial growth media for the use of targeted nutrient starvation as an antimicrobial strategy. Only in phosphate poor environments a toxic effect was observed. The effect was shown on Escherichia coli
A J Barón-González et al.
Journal of physics. Condensed matter : an Institute of Physics journal, 23(49), 496003-496003 (2011-11-24)
The origin of dielectric anomalies and magnetodielectric response of La(2)MnCoO(6) has been investigated by means of ultra-high resolution synchrotron x-ray powder diffraction, neutron powder diffraction, resistivity, magnetization and dielectric measurements. The study has been performed on two different bulk samples
Amel Amirouche-Korichi et al.
Dental materials : official publication of the Academy of Dental Materials, 25(11), 1411-1418 (2009-08-18)
The degree of conversion (DC) and polymerization shrinkage of resin composites are closely related manifestations of the same process. Ideal dental composite would show an optimal degree of conversion and minimal polymerization shrinkage. These seem to be antagonistic goals, as
Ver todos los artículos relacionados

Artículos

Metal Hydrides for NiMH Battery Applications

Rechargeable solid-state batteries are becoming increasingly important due to wide-spread use in computers, portable electronics, and vehicular applications.

Thermoelectric Performance of Perovskite-type Oxide Materials

The prevailing strategies for heat and electric-power production that rely on fossil and fission fuels are having a negative impact on the environment and on our living conditions.

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico