Direkt zum Inhalt
Merck
  • Centrifugal partition chromatography elution gradient for isolation of sesquiterpene lactones and flavonoids from Anvillea radiata.

Centrifugal partition chromatography elution gradient for isolation of sesquiterpene lactones and flavonoids from Anvillea radiata.

Journal of chromatography. B, Analytical technologies in the biomedical and life sciences (2015-02-04)
Emilie Destandau, Meryem Alaoui Boukhris, Sandrine Zubrzycki, Mohamed Akssira, Lhoucine El Rhaffari, Claire Elfakir
ZUSAMMENFASSUNG

An innovative procedure coupling pressurized solvent extraction and centrifugal partition chromatography (CPC) used in linear gradient elution mode was developed to isolate two pure germacranolides (9α-hydroxyparthenolide and 9β-hydroxyparthenolide) and to separate flavonoids (nepetin, isorhamnetin and jaceosidin) and chlorophyll pigments from aerial parts of Anvillea radiata (Coss.&Durieu). The two main germacranolides recovered using this method represent 2 and 5% of the dried plant material respectively. These molecules were extracted using accelerated solvent extraction with chloroform. After optimization of the CPC method, a two-phase solvent system composed of heptane/ethyl acetate/methanol/water (1:5:1:5 v/v/v/v) was employed in descending mode to isolate the germacranolides. Then the lower phase of a heptane/ethyl acetate/methanol/water (6:5:6:5 v/v/v/v) system was pumped in descending mode to generate a linear elution gradient, progressively decreasing the mobile phase polarity, that enabled the flavonoid compounds to be separated in the same run. The efficiency of the preparative separation was controlled through RP-HPLC analysis of the obtained fractions using UV, evaporative light scattering and mass spectrometry detection. The structural identification of the two germacranolides purified over 99% was established by (1)H NMR and (13)C NMR. The least abundant flavonoids were identified by mass spectrometry.

MATERIALIEN
Produktnummer
Marke
Produktbeschreibung

Sigma-Aldrich
Methanol, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Ethyl alcohol, Pure, 200 proof, for molecular biology
Sigma-Aldrich
Tetrahydrofuran, inhibitor-free, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Methanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Ethyl alcohol, Pure, 200 proof, ACS reagent, ≥99.5%
Sigma-Aldrich
Ethylacetat, ACS reagent, ≥99.5%
Sigma-Aldrich
Ethylacetat, suitable for HPLC, ≥99.7%
Sigma-Aldrich
Chloroform, contains 100-200 ppm amylenes as stabilizer, ≥99.5%
Sigma-Aldrich
Tetrahydrofuran, contains 250 ppm BHT as inhibitor, ACS reagent, ≥99.0%
Sigma-Aldrich
Heptan, suitable for HPLC, ≥99%
Sigma-Aldrich
Ameisensäure, reagent grade, ≥95%
Sigma-Aldrich
Methanol, HPLC Plus, ≥99.9%
Sigma-Aldrich
Chloroform, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%, contains amylenes as stabilizer
Sigma-Aldrich
Natriumdodecylsulfat, BioReagent, suitable for electrophoresis, for molecular biology, ≥98.5% (GC)
Sigma-Aldrich
Ethylacetat, HPLC Plus, for HPLC, GC, and residue analysis, 99.9%
Sigma-Aldrich
Heptan, ReagentPlus®, 99%
Sigma-Aldrich
Chloroform, suitable for HPLC, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Ameisensäure, ACS reagent, ≥96%
Sigma-Aldrich
Ethyl alcohol, Pure, 200 proof, meets USP testing specifications
Sigma-Aldrich
Chloroform, contains ethanol as stabilizer, ACS reagent, ≥99.8%
Sigma-Aldrich
Ethyl alcohol, Pure, 190 proof, for molecular biology
Sigma-Aldrich
Natriumdodecylsulfat, ≥99.0% (GC), dust-free pellets
Sigma-Aldrich
Methanol, suitable for HPLC, gradient grade, suitable as ACS-grade LC reagent, ≥99.9%
Sigma-Aldrich
Natriumdodecylsulfat -Lösung, BioUltra, for molecular biology, 10% in H2O
Sigma-Aldrich
Heptan, HPLC Plus, for HPLC, GC, and residue analysis, 99%
Sigma-Aldrich
Methanol, Laboratory Reagent, ≥99.6%
Sigma-Aldrich
Ethylacetat, suitable for HPLC, ≥99.8%
Sigma-Aldrich
Ameisensäure, ACS reagent, ≥88%
Sigma-Aldrich
Chloroform, ReagentPlus®, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Chloroform, contains amylenes as stabilizer, ACS reagent, ≥99.8%