CS60HX01H1

Clarisolve^® Depth Filters

High-density cell cultures

• Synonyma: Clarisolve 60 μm Lab Scale Depth Filters, 0.014 m² (0.15 ft²)
• UNSPSC Code: 23151806
• eCl@ss: 32031690
• NACRES: NB.24

Vlastnosti

• material: TPE seal; polypropylene
• Quality Level: 400
• manufacturer/tradename: Clarisolve^®
• parameter: 2.1 bar max. differential pressure (30 psid) at 37 °C (Forward); 2.1 bar max. differential pressure (30 psid) at 37 °C (Maximum); 2.1 bar max. differential pressure (30 psid) at 37 °C (Reverse); 2.1 bar max. differential pressure (30 psid) at 4 °C (Forward)
• H: 14 cm (5.3 in.)
• L: 22 cm (8.5 in.)
• W: 7.4 cm (2.9 in.)
• filtration area: 0.014 m²
• impurities: <0.25 EU/mL (LAL test, Aqueous extraction; on filter media only)
• input: sample type liquid
• conductivity: ≤0.15 μS/cm
• shipped in: ambient

Popis

General description

product water; post autoclave (1 cycle of 60 minutes at 123 °C) and flushed at a flux rate of 600 LMH pure water flush for 10 minutes. A sample of filtrate was pulled every 2 minutes during flush and tested for conductivity.

Application

High-density cell cultures

Specifications

Filter Grade: 60HX

Preparation Note

Sterilization Method
Integrity is maintained after 2 autoclave cycles of 60 minutes at 123 °C.

Analysis Note

Total organic carbon (TOC) residue: Measured at below detectable limits.

Legal Information

CLARISOLVE is a registered trademark of Merck KGaA, Darmstadt, Germany