Saltar al contenido
Merck
Todas las fotos(1)

Documentos clave

MX1583D

Supelco

Molecular Sieve, Type 3A

bead size 8-12 mesh

Sinónimos:

Molecular Sieve

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Todas las fotos(1)

About This Item

Código UNSPSC:
23201100
En este momento no podemos mostrarle ni los precios ni la disponibilidad

Formulario

beads

tamaño microesfera

8-12 mesh

color

tan

Condiciones de envío

ambient

temp. de almacenamiento

room temp

Categorías relacionadas

Descripción general

Molecular Sieve, Type 3A is a synthetic crystalline aluminosilicate (potassium form crystal structure or type A zeolite) with an effective pore diameter of 3 Å. It is used as an effective adsorbent. It adsorbs molecules having a kinetic diameter of less than 3 Å and excludes molecules with a kinetic diameter of greater than 3 Å.[1][2][3]

Aplicación

Molecular Sieve, Type 3A can be used:
  • As a selective adsorbent for the adsorption of water and ammonia.[4]
  • In drying polar liquids such as methanol and ethanol.[2][4]
  • In commercial dehydration of unsaturated hydrocarbon streams, including cracked gas, propylene, butene, and natural gas.[5][6][7]

Nota de análisis

Color: Tan
Form: Beads
Identification (potassium): To pass test
Mesh size (8-12): 80% min

Pictogramas

Corrosion
GHS05

Palabra de señalización

Danger

Frases de peligro

H314

Clasificaciones de peligro

Eye Dam. 1 - Skin Corr. 1B

Código de clase de almacenamiento

8B - Non-combustible corrosive hazardous materials

Clase de riesgo para el agua (WGK)

WGK 1

Punto de inflamabilidad (°F)

Not applicable

Punto de inflamabilidad (°C)

Not applicable

Certificados de análisis (COA)

Busque Certificados de análisis (COA) introduciendo el número de lote del producto. Los números de lote se encuentran en la etiqueta del producto después de las palabras «Lot» o «Batch»

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Los clientes también vieron

Slide 1 of 4

1 of 4

Molecular sieves, 3 Å pellets, ~1.6 mm

Sigma-Aldrich

334286

Molecular sieves, 3 Å

Molecular sieve 0.4 nm bead diam. ~2 mm, size ~10 mesh

Supelco

1.05739

Molecular sieve 0.4 nm

Tetrahidrofuran Meets ACS Specifications GR ACS

Supelco

TX0280

Tetrahidrofuran

Alcohol Reagent, OmniSolv®

Supelco

AX0445

Alcohol

Enrichment of ammonia concentration from aqua-ammonia vapors by using 3A molecular sieve
Chiou Jenq-Shing, et al.
Energy Conversion and Management , 50(10), 2665-2669 (2009)
Carbon dioxide capture using a zeolite molecular sieve sampling system for isotopic studies (13C and 14C) of respiration
Hardie SML, et al.
Radiocarbon, 47(3), 441-451 (2005)
Optimization of manganese reduction in biotreated POME onto 3A molecular sieve and clinoptilolite zeolites
Jami Mohammed S, et al.
Water Environment Research : A Research Publication of the Water Environment Federation, 88(6), 566-576 (2016)
Effect 3A and 5A molecular sieve on alcohol-assisted methanol synthesis from CO2 and H2 over Cu/ZnO catalyst
Boonamnuay T, et al.
International Journal of Hydrogen Energy (2021)
Natural gas dehydration by desiccant materials
Farag HAA, et al.
Alexandria Engineering Journal, 50(4), 431-439 (2011)
Ver todos los artículos relacionados

Questions

1–4 of 4 Questions  

  1. How can I determine the shelf life / expiration / retest date of this product?

    1 answer

    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdf

      Helpful?

  2. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 answer

    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      Helpful?

  3. Are this 3A molecular sieves food grade?

    1 answer

    1. No, this product is not food-grade. Currently, a food-grade product option is not available.

      Helpful?

  4. Is there a regeneration procedure for these Molecular Sieve dessicants ?

    1 answer

    1. Molecular sieves can be dried in a drying oven above 250°C to a water content of 2-3 g/100 g. The remaining water can be removed at 300-350°C using a vacuum oil pump (10-1-10-3 mbar), whereby, as is usual, a cold trap containing carbon dioxide coolant or liquid air should be connected. Water pumps, due to their high partial water vapor pressure, are completely unsuitable for this purpose. For safety reasons, molecular sieves that have been used to dry solvents should be freed from possible solvent by mixing with water before regeneration. This can be carried out as often as required; the maximum regeneration temperature is 450°C.

      Helpful?

Reviews

No rating value

Active Filters

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico