Saltar al contenido
Merck

277908

Sigma-Aldrich

Ammonium molybdate

99.98% trace metals basis

Sinónimos:

Ammonium orthomolybdate, Diammonium molybdate

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización


About This Item

Fórmula lineal:
(NH4)2MoO4
Número de CAS:
Peso molecular:
196.01
Número CE:
Número MDL:
Código UNSPSC:
12352302
ID de la sustancia en PubChem:
NACRES:
NA.23
En este momento no podemos mostrarle ni los precios ni la disponibilidad

grado

for analytical purposes

Nivel de calidad

Ensayo

99.98% trace metals basis

Formulario

solid

idoneidad de la reacción

reagent type: catalyst
core: molybdenum

técnicas

electron microscopy: suitable

impurezas

≤250.0 ppm Trace Metal Analysis

solubilidad

ethanol: insoluble(lit.)

cadena SMILES

N.N.O[Mo](O)(=O)=O

InChI

1S/Mo.2H3N.2H2O.2O/h;2*1H3;2*1H2;;/q+2;;;;;;/p-2

Clave InChI

LZRXBDCICLHKEN-UHFFFAOYSA-L

¿Está buscando productos similares? Visita Guía de comparación de productos

Descripción general

Ammonium molybdate can be prepared by dissolving molybdenum trioxide in ammonia.[1]

Aplicación

Ammonium molybdate has been used to prepare phosphomolybdates.[2] (NH4)2MoO4 was used as an analytical reagent for quantitative analysis of phosphates, silicates, arsenates and lead in their aqueous solutions.2 At saturated concentration, (NH4)2MoO4 was used to perform cryo-negative staining[3][4] and as a negative stain in biological electron microscopy.[5] Ammonium molybdate was used in study of crystallisation of cell-free-expressed membrane proteins.[6]
Ammonium molybdate has been used to prepare phosphomolybdates.[2] (NH4)2MoO4 was used as an analytical reagent for quantitative analysis of phosphates, silicates, arsenates and lead in their aqueous solutions.[7] At saturated concentration, (NH4)2MoO4 was used to perform cryo-negative staining[3][4] and as a negative stain in biological electron microscopy.[5] Ammonium molybdate was used in study of crystallisation of cell-free-expressed membrane proteins.[6]

Pictogramas

Exclamation mark

Palabra de señalización

Warning

Frases de peligro

Clasificaciones de peligro

Acute Tox. 4 Oral

Código de clase de almacenamiento

13 - Non Combustible Solids

Clase de riesgo para el agua (WGK)

WGK 1

Punto de inflamabilidad (°F)

Not applicable

Punto de inflamabilidad (°C)

Not applicable

Equipo de protección personal

dust mask type N95 (US), Eyeshields, Gloves


Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Handbook of Non-Ferrous Metal Powders: Technologies and Applications null
S De Carlo et al.
Journal of structural biology, 138(3), 216-226 (2002-09-10)
Beam damage is the main resolution-limiting factor when biological particles are observed by cryoelectron microscopy in a thin vitrified solution film. Furthermore, the low contrast of the specimen frequently makes observation difficult and limits the possibility of image processing. Cryo-negative
M Adrian et al.
Micron (Oxford, England : 1993), 29(2-3), 145-160 (1998-07-31)
A procedure is presented for the preparation of thin layers of vitrified biological suspensions in the presence of ammonium molybdate, which we term cryo-negative staining. The direct blotting of sample plus stain solution on holey carbon supports produces thin aqueous
Effect of the addition of ammonium molybdate on metakaolin-based geopolymer formation: Shrinkage and crystallization
Vidal L, et al.
Powder Technology, 275, 211-219 (2015)
Leandro Silva Costa et al.
Marine drugs, 9(6), 952-966 (2011-07-13)
Fucan is a term used to denominate a type of polysaccharide which contains substantial percentages of l-fucose and sulfate ester groups. We obtained five heterofucans from Sargassum filipendula by proteolytic digestion followed by sequential acetone precipitation. These heterofucans are composed

Questions

1–2 of 2 Questions  
  1. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 answer
    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      Helpful?

  2. How can I determine the shelf life / expiration / retest date of this product?

    1 answer
    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdf

      Helpful?

Reviews

No rating value

Active Filters

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico