Seleccione un Tamaño
| Talla/SKU | Disponibilidad | Precio |
|---|
Acerca de este artículo
type
(High purity Salts)
Quality Segment
assay
≥99.9% trace metals basis, 98-102% (EDTA, complexometric)
form
powder or crystals
sustainability
Sustainability features
impurities
≤1000 ppm trace metals basis
color
faint blue to dark blue-green
pH
4.3-4.7 (20 °C, 100 g/L in water)
solubility
water: soluble
density
2.07 g/cm3 at 20 °C
anion traces
chloride (Cl-): ≤20 ppm
cation traces
Al: <50 ppm, Ca: <50 ppm, Co: <50 ppm, Cu: <50 ppm, Fe: <50 ppm, K: <50 ppm, Mg: <50 ppm, Na: <50 ppm, Pb: <50 ppm, Zn: <50 ppm
SMILES string
[Ni+2].[S](=O)(=O)([O-])[O-].O.O.O.O.O.O
InChI
1S/Ni.H2O4S.6H2O/c;1-5(2,3)4;;;;;;/h;(H2,1,2,3,4);6*1H2/q+2;;;;;;;/p-2
InChI key
RRIWRJBSCGCBID-UHFFFAOYSA-L
General description
Application
Therefore, Nickel(II) sulfate hexahydrate has been widely used as a key component for the synthesis of Cathode for Lithium-ion batteries. - Spherical NCM 622 and Li[Ni0.9Co0.05Mn0.05]O2 (NCM 900505) were synthesized via a co-precipitation method using Nickel(II) sulfate hexahydrate. In order to achieve the desired energy density, it is necessary to maximize both the nickel content in the cathode and the cutoff voltage. [] - to synthesis single-crystal, Ni-rich NCM and polycrystalline NCM cathodes with various Ni content by coprecipitation method . These Ni-rich layered cathodes like NCM, NCA, and NCMA ([Ni1–x–yCox(Mn and/or Al)y]O2) are the top choices for powering upcoming electric vehicles. It is found that polycrystalline NCM cathodes are prone to intergranular microcracking during cycling, single crystal NCM cathodes demonstrate resilience against mechanical fracture, even under highly charged conditions or repeated cycles. Due to limited lithium-ion diffusion pathways, the electrochemical performance of single crystal -NCM cathodes, particularly in terms of capacity and cycling stability, is lower compared to that of polycrystalline-NCM cathodes. The difference in the electrochemical performance of single crystal -NCM and polycrystalline-NCM cathodes grows as the Ni fraction increases. In addition, Nickel(II) sulfate hexahydrate is widely used for electroplating for producing metallic coatings. Nickel(II) sulfate hexahydrate can also be used as a catalyst in: -Pt50Ni50 catalysts supported on MCM-41 were produced using wet co-impregnation. These catalysts were then employed for hydrogenation reactions of benzene in gas phase. The morphology of the metal phase within the catalysts has a notable impact on the conversion of benzene to cyclohexane. Factors like reduction temperature, NaBH4 concentration, and reduction medium influence the particle morphology. []
Features and Benefits
- Water soluble
- Medium purity (99.9%)
- Low trace metals in ppm level
- Cost effective Suitable for battery applications
- Recycled catalyst
1 of 1
Este artículo | |||
|---|---|---|---|
| description ≥99.9% trace metals basis | description ReagentPlus®, powder or crystals | description ACS reagent, ≥98% | description ≥99.99% trace metals basis |
| form powder or crystals | form powder or crystals | form crystals | form solid |
| solubility water: soluble | solubility - | solubility - | solubility - |
| assay ≥99.9% trace metals basis, 98-102% (EDTA, complexometric) | assay 98.0-102.0% (EDTA titration) | assay ≥98% | assay ≥99.99% trace metals basis |
| Quality Level 200 | Quality Level 200 | Quality Level 200 | Quality Level 100 |
| impurities ≤1000 ppm trace metals basis | impurities - | impurities ≤0.005% insolubles, ≤0.002% N compounds | impurities <100 ppm total metallic impurities, ≤0.002% N compounds, ≤0.005% insolubles |
| anion traces chloride (Cl-): ≤20 ppm | anion traces - | anion traces chloride (Cl-): ≤0.001% | anion traces chloride (Cl-): ≤0.001% |
Still not finding the right product?
Explore all of our products under Nickel(II) sulfate hexahydrate
Palabra de advertencia
Danger
Códigos de peligro
Indicaciones de precaución
Hazard Classifications
Acute Tox. 4 Inhalation - Acute Tox. 4 Oral - Aquatic Acute 1 - Aquatic Chronic 1 - Carc. 1A Inhalation - Muta. 2 - Repr. 1B - Resp. Sens. 1 - Skin Irrit. 2 - Skin Sens. 1 - STOT RE 1 Inhalation
Órganos diana
Respiratory Tract
Clase de almacenamiento
6.1C - Combustible acute toxic Cat.3 / toxic compounds or compounds which causing chronic effects
Punto de inflamación (°F)
Not applicable
Punto de inflamación (°C)
Not applicable
Elija entre una de las versiones más recientes:
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.






