791539
Titania paste, reflector
Sinónimos:
Greatcell Solar® WER2-O, TiO2 paste
About This Item
Productos recomendados
descripción
Crystal Structure: > 99% anatase (analysis carried out on starting material, prior to paste manufacture)
Nivel de calidad
Formulario
paste (white)
concentración
20.0 wt. % (+/- 1.2 wt%)
tam. prom. pieza
150-250 nm (scatter)
viscosidad
15000-25000 mPa.s (Analysis carried out with 20mm 4 degree cone/plate; 40 s-1)
cadena SMILES
[Ti](=O)=O
InChI
1S/2O.Ti
Clave InChI
GWEVSGVZZGPLCZ-UHFFFAOYSA-N
Descripción general
Aplicación
Scattering Titania Paste contains highly dispersed anatase scattering particles (150nm to 250nm). This paste produces a non-active scattering layer when applied onto a pre-printed active layer.
After drying; this paste must be fired – together with the pre-printed active layers – at or above 500°C. This results in an opaque sintered layer; with a thickness of ~3μm for one printed layer; when using a 90T mesh screen.
Storage: Store in the dark at 20°C
Información legal
Greatcell Solar® is a registered trademark of Greatcell Solar
Palabra de señalización
Warning
Frases de peligro
Consejos de prudencia
Clasificaciones de peligro
Eye Irrit. 2 - Skin Irrit. 2
Código de clase de almacenamiento
10 - Combustible liquids
Clase de riesgo para el agua (WGK)
WGK 1
Punto de inflamabilidad (°F)
195.8 °F
Punto de inflamabilidad (°C)
91 °C
Elija entre una de las versiones más recientes:
Certificados de análisis (COA)
¿No ve la versión correcta?
Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
Los clientes también vieron
Artículos
Few Monolayer Atomic Layer Deposition (ALD) on Surfaces and Interfaces for Energy Applications
Dye-sensitized solar cells (DSCs) are 3rd generation solar cells combining the promise of high efficiency with low production costs.
Organic photovoltaics (OPVs) represent a low-cost, lightweight, and scalable alternative to conventional solar cells. While significant progress has been made in the development of conventional bulk heterojunction cells, new approaches are required to achieve the performance and stability necessary to enable commercially successful OPVs.
While dye sensitization as the basis for color photography has been accepted for a very long time,1 attempts to use this principle for the conversion of solar light to electricity generally had resulted only in very low photocurrents, below 100 nA/cm
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico