Passa al contenuto
Merck
  • Nanocasting of carbon films with interdigitated bimodal three-dimensionally ordered mesopores by template-replica coassembly.

Nanocasting of carbon films with interdigitated bimodal three-dimensionally ordered mesopores by template-replica coassembly.

Langmuir : the ACS journal of surfaces and colloids (2014-09-25)
Zheng Tian, Mark A Snyder
ABSTRACT

Carbon films with interdigitated bimodal three-dimensionally ordered mesoporosity (ib3DOm) are realized by a scalable nanoreplication process that removes the common need plaguing hard-templating strategies for multistep prefabrication of porous sacrificial templates. Specifically, evaporation-induced convective codeposition of size-tunable (ca. 20-50 nm) silica nanoparticles with a surrogate molecular carbon precursor (glucose), followed by carbonization and template etching, leads to remarkably ordered, crack-free mesoporous carbon films of tunable thickness (ca. 100-1000 nm) and pore size. Association of the molecular carbon precursor with the assembling pore forming particles is found to transition the system among three distinct film morphologies (collapsed, ib3DOm C, disordered), thereby establishing a pseudophase behavior controlled by silica solids content and incipient glucose concentration. Namely, a parametric window wherein ib3DOm C films can be realized is identified, with a diffuse lower phase boundary associated with collapsing carbon films, and a more distinct order-to-disorder transition encountered at higher glucose concentrations. Mechanistic insight suggests that glucose association with the lysine-silica nanoparticle surface modulates the lattice spacing, d, of the periodically ordered mesopores in the coassembled films, with the onset of the order-to-disorder transition occurring at a critical normalized lattice spacing, dc/D ∼ 1.16. This appears to apply across the phase space associated with D = 50 nm silica particles and to translate among other phase spaces associated with smaller particles (e.g., 30 nm). We briefly demonstrate the robustness of the codeposition process for realizing ib3DOm C films on rough FTO glass substrates and show that, in this form, these materials hold potential as low-cost alternatives to costly platinum electrodes for dye-sensitized solar cells.

MATERIALI
N° Catalogo
Marchio
Descrizione del prodotto

Sigma-Aldrich
Acido solforico, ACS reagent, 95.0-98.0%
Sigma-Aldrich
Perossido di idrogeno, contains inhibitor, 30 wt. % in H2O, ACS reagent
Sigma-Aldrich
Idrossido di potassio, ACS reagent, ≥85%, pellets
Sigma-Aldrich
Perossido di idrogeno, 30 % (w/w) in H2O, contains stabilizer
Sigma-Aldrich
Idrossido di potassio, reagent grade, 90%, flakes
Sigma-Aldrich
Hydrofluoric acid, ACS reagent, 48%
Sigma-Aldrich
Perossido di idrogeno, 50 wt. % in H2O, stabilized
Sigma-Aldrich
Potassium hydroxide solution, 45 wt. % in H2O
Sigma-Aldrich
Acido solforico, 99.999%
Sigma-Aldrich
Idrossido di potassio, semiconductor grade, pellets, 99.99% trace metals basis (Purity excludes sodium content.)
Supelco
Potassium hydroxide solution, volumetric, 8.0 M KOH (8.0N)
Sigma-Aldrich
Perossido di idrogeno, 30% (w/w), puriss. p.a., reag. ISO, reag. Ph. Eur.
Sigma-Aldrich
Hydrofluoric acid, 48 wt. % in H2O, ≥99.99% trace metals basis
Sigma-Aldrich
Acido solforico, puriss. p.a., for determination of Hg, ACS reagent, reag. ISO, reag. Ph. Eur., 95.0-97.0%
Sigma-Aldrich
Idrossido di potassio, ≥85% KOH basis, pellets, white
Sigma-Aldrich
L-lisina, ≥98% (TLC)
Sigma-Aldrich
Idrossido di potassio, BioXtra, ≥85% KOH basis
Sigma-Aldrich
Idrossido di potassio, puriss., meets analytical specification of Ph. Eur., BP, 85-100.5%, pellets
Sigma-Aldrich
Idrossido di potassio, technical, ≥85%, powder
Sigma-Aldrich
Perossido di idrogeno, contains ~200 ppm acetanilide as stabilizer, 3 wt. % in H2O
Sigma-Aldrich
Perossido di idrogeno, contains inhibitor, 35 wt. % in H2O
Sigma-Aldrich
Perossido di idrogeno, purum p.a., ≥35% (RT)
Sigma-Aldrich
Idrossido di potassio, pellets, reag. Ph. Eur., ≥85%
Sigma-Aldrich
L-lisina, crystallized, ≥98.0% (NT)
Sigma-Aldrich
Acido solforico, puriss., meets analytical specification of Ph. Eur., BP, 95-97%
Sigma-Aldrich
Saccharin, ≥98%
Sigma-Aldrich
Idrossido di potassio, anhydrous, ≥99.95% trace metals basis
Millipore
Perossido di idrogeno, 3%, suitable for microbiology
Sigma-Aldrich
Acido solforico, puriss. p.a., ≥25% (T)
Supelco
Acido solforico, 0.1 M H2SO4 in water (0.2N), eluent concentrate for IC