Passa al contenuto
Merck

A new look at old agents for pleurodesis: nitrogen mustard, sodium hydroxide, and silver nitrate.

Current opinion in pulmonary medicine (2000-07-27)
F S Vargas, A O Carmo, L R Teixeira
ABSTRACT

In this review we analyze the evolution of pleurodesis. In spite of the fact that this procedure started in the beginning of the 20th century, the ideal sclerosing agent is not yet known. Emphasis is placed on the current tendency toward minimally invasive procedures in which insertion of catheters is favored over surgical procedures such as placement of chest tubes or thoracoscopy. Among the sclerosing agents, talc is preferred throughout the world. However, the possible development of acute respiratory distress syndrome, which is sometimes fatal, caused the awakening of interest in other drugs. Nitrogen mustard induces pleurodesis but causes important side effects. Sodium hydroxide and silver nitrate are effective and may be used in humans beings.

MATERIALI
N° Catalogo
Marchio
Descrizione del prodotto

Sigma-Aldrich
Argento nitrato, ACS reagent, ≥99.0%
Sigma-Aldrich
Sodio idrossido, ACS reagent, ≥97.0%, pellets
Sigma-Aldrich
Sodio idrossido, reagent grade, ≥98%, pellets (anhydrous)
Sigma-Aldrich
Idrossido di sodio, 50% in H2O
Sigma-Aldrich
Idrossido di sodio, BioUltra, for molecular biology, 10 M in H2O
Sigma-Aldrich
Argento nitrato, ReagentPlus®, ≥99.0% (titration)
Sigma-Aldrich
Idrossido di sodio, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
Sodio idrossido, BioXtra, ≥98% (acidimetric), pellets (anhydrous)
Sigma-Aldrich
Sodio idrossido, puriss., meets analytical specification of Ph. Eur., BP, NF, E524, 98-100.5%, pellets
Sigma-Aldrich
Sodio idrossido, reagent grade, 97%, powder
Sigma-Aldrich
Sodio idrossido, pellets, semiconductor grade, 99.99% trace metals basis
Sigma-Aldrich
Sodio idrossido, puriss. p.a., ACS reagent, reag. Ph. Eur., K ≤0.02%, ≥98%, pellets
Sigma-Aldrich
Idrossido di sodio, 5.0 M
Sigma-Aldrich
Argento nitrato, 99.9999% trace metals basis
Sigma-Aldrich
Argento nitrato, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.8%
Sigma-Aldrich
Sodio idrossido, beads, 16-60 mesh, reagent grade, 97%
Sigma-Aldrich
Sodio idrossido, puriss. p.a., ACS reagent, K ≤0.02%, ≥98.0% (T), pellets
Sigma-Aldrich
Sodio idrossido, reagent grade, 97%, flakes
Sigma-Aldrich
Ascarite®, Sodium hydroxide-coated silica, 20-30 mesh
Sigma-Aldrich
Sodio idrossido, BioUltra, for luminescence, ≥98.0% (T), pellets
Sigma-Aldrich
Argento nitrato, puriss. p.a., ≥99.5% (AT)
Sigma-Aldrich
Argento nitrato, meets analytical specification of Ph. Eur., BP, USP, 99.8-100.5%
Sigma-Aldrich
Ascarite®, Sodium hydroxide-coated silica, 8-20 mesh
Sigma-Aldrich
Argento nitrato, 2.5 % (w/v) AgNO3 in H2O
Sigma-Aldrich
Argento nitrato, BioReagent, suitable for plant cell culture, >99% (titration)
Sigma-Aldrich
Idrossido di sodio, purum, ≥32%
Sigma-Aldrich
Silver nitrate on silica gel, extent of labeling: ~10 wt. % loading, +230 mesh
Supelco
Idrossido di sodio, 0.1 M NaOH in water (0.1N), Eluent concentrate for IC
Supelco
Idrossido di sodio, 49-51% in water, eluent for IC
Sigma-Aldrich
Argento nitrato, BioXtra, >99% (titration)