Passa al contenuto
Merck
  • Direct synthesis of pentafluoroethyl copper from pentafluoropropionate as an economical C2F5 source: application to pentafluoroethylation of arylboronic acids and aryl bromides.

Direct synthesis of pentafluoroethyl copper from pentafluoropropionate as an economical C2F5 source: application to pentafluoroethylation of arylboronic acids and aryl bromides.

Organic letters (2014-06-14)
Hiroki Serizawa, Kohsuke Aikawa, Koichi Mikami
ABSTRACT

The direct synthesis of pentafluoroethyl copper (CuC2F5) from a cuprate reagent and ethyl pentafluoropropionate as one of the most economical and useful pentafluoroethyl sources was accomplished. The advantages of this method are; all the reagents employed are low-cost and operationally simple, and the CuC2F5 reagent is prepared in virtually quantitative yield. Furthermore, the CuC2F5 reagent prepared was successfully applied to two types of pentafluoroethylations with arylboronic acids and aryl bromides to provide the pentafluoroethylated aromatic products in good-to-excellent yields, including large scale operations.

MATERIALI
N° Catalogo
Marchio
Descrizione del prodotto

Sigma-Aldrich
Copper, powder, 99.999% trace metals basis
Sigma-Aldrich
Copper, foil, thickness 0.25 mm, 99.98% trace metals basis
Sigma-Aldrich
Copper, powder, <425 μm, 99.5% trace metals basis
Sigma-Aldrich
Copper, wire, diam. 1.0 mm, ≥99.9%
Sigma-Aldrich
Copper, powder (spheroidal), 10-25 μm, 98%
Sigma-Aldrich
Copper, nanopowder, 40-60 nm particle size (SAXS), ≥99.5% trace metals basis
Sigma-Aldrich
Copper, powder, <75 μm, 99%
Sigma-Aldrich
Copper, wire, diam. 0.25 mm, 99.999% trace metals basis
Sigma-Aldrich
Copper, foil, thickness 0.025 mm, 99.98% trace metals basis
Sigma-Aldrich
Copper, nanopowder, 60-80 nm particle size (SAXS), ≥99.5% trace metals basis
Sigma-Aldrich
Copper, powder (dendritic), <45 μm, 99.7% trace metals basis
Sigma-Aldrich
Copper, foil, ≥99.8% (complexometric)
Sigma-Aldrich
Copper, turnings, purum p.a., ≥99.0%
Sigma-Aldrich
Copper, foil, thickness 0.5 mm, 99.98% trace metals basis
Sigma-Aldrich
Copper, wire, diam. 0.64 mm, 99.995% trace metals basis
Sigma-Aldrich
Copper, beads, 2-8 mm, 99.9995% trace metals basis
Sigma-Aldrich
Copper, foil, thickness 1.0 mm, 99.999% trace metals basis
Sigma-Aldrich
Copper, shot, −3-+14 mesh, 99%
Copper, mesh, 100x100mm, nominal aperture 0.14mm, thickness 0.25mm, wire diameter 0.115mm, 100x100 wires/inch, open area 30.3%, plain weave mesh
Copper, rod, 100mm, diameter 9.5mm, hard, 99.9%
Sigma-Aldrich
Copper, wire, diam. 2.0 mm, 99.999% trace metals basis
Sigma-Aldrich
Copper, ACS reagent, granular, 10-40 mesh, ≥99.90%
Copper, tube, 100mm, outside diameter 3.5mm, inside diameter 1.56mm, wall thickness 0.97mm, as drawn, 99.9%
Sigma-Aldrich
Copper, beads, 2-8 mm, ≥99.99% trace metals basis
Copper, tube, 500mm, outside diameter 6.35mm, inside diameter 4.93mm, wall thickness 0.71mm, as drawn, 99.9%
Copper, rod, 50mm, diameter 6.35mm, as drawn, 99.999%
Copper - O.F.H.C., foil, 100x100mm, thickness 0.1mm, hard, 99.95+%
Sigma-Aldrich
Ethyl pentafluoropropionate, 98%
Copper - O.F.H.C., sheet, 150x150mm, thickness 3.0mm, 99.95+%
Copper, rod, 1000mm, diameter 4.8mm, hard, 99.9%