26289

Hamilton^® SampleLock syringe

1050SL, volume 50 mL, needle size 22 ga (bevel tip), needle L 51 mm (2 in.)

• Sinonimo/i: 14-815-571
• Codice UNSPSC: 41122001

Proprietà

• Materiali: bevel tip stainless steel needle (point style 2)
• Misura ago: 22 ga (bevel tip)
• Caratteristiche: syringe type Sample Lock
• Confezionamento: pkg of 1 ea
• Produttore/marchio commerciale: Hamilton 86336
• Lungh. ago: 51 mm (2 in.)
• Volume: 50 mL

Descrizione

Descrizione generale

• Twist valve locks the sample in the syringe
• Positive rear plunger stop eliminates sample loss and plunger blowout at high pressures (not applicable to 1705 and 1710 models)
• Connects to either male or female luer fittings by using an adapter
• Male and female luer and male luer lock adapters thread onto the SampleLock valve making the syringe compatible with many connectors and fittings
• All adapters have a Kel-F (CTFE) fluid path, with a port diameter of 0.039 in.
• Internal standards can be added through the valve port into the sample contained in the syringe

     

Applicazioni

Hamilton^® SampleLock syringe has been used in sampling gas and liquid phase for GC analysis, in isothermal vapor-liquid equilibrium data measured for two binary systems.[1]

Altre note

We recommend replacement needle Cat. No. 19136-U (22s ga needle) for the 1705SL, 1710SL and 1725SL syringes; Cat. No. 19137-U (22 ga needle) is recommended for the larger syringes. Both replacement needles will fit 250 μL to 10 mL syringes and will fit any SampleLock syringe.

Plunger Assemblies are available for the 1705SL (Cat. No. 26152-U) and 1710SL (Cat. No. 26154) syringes.

Note legali

Hamilton is a registered trademark of Hamilton Co.