The glass is ITO coated on one side. The coated side may be determined by holding the glass to the light. It will appear lightly opaque and may display a slight difference in color.
703184
Indium tin oxide coated glass slide, square
surface resistivity 30-60 Ω/sq, slide
Sinonimo/i:
ITO, ITO coated slide, square
Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali
Scegli un formato
10 PKG
CHF 174.00
Scegli un formato
Cambia visualizzazione
10 PKG
CHF 174.00
About This Item
Formula condensata:
In2O3 · (SnO2)x
Numero CAS:
Numero MDL:
Codice UNSPSC:
12352103
ID PubChem:
NACRES:
NA.23
Prodotti consigliati
Resistività di superficie
30-60 Ω/sq
Lungh. × largh. × spess.
25 mm × 25 mm × 1.1 mm
Trasmittanza
84% (nominal at 550nm)
Indice di rifrazione
n20/D 1.517
Stringa SMILE
O=[Sn]=O.O=[In]O[In]=O
InChI
1S/2In.5O.Sn
LNNWKAUHKIHCKO-UHFFFAOYSA-N
Cerchi prodotti simili? Visita Guida al confronto tra prodotti
Categorie correlate
Substrati
Substrate: unpolished float glass, Si02 passivated (200-300 Å)
Codice della classe di stoccaggio
13 - Non Combustible Solids
Classe di pericolosità dell'acqua (WGK)
WGK 3
Punto d’infiammabilità (°F)
Not applicable
Punto d’infiammabilità (°C)
Not applicable
Dispositivi di protezione individuale
dust mask type N95 (US), Eyeshields, Gloves
Scegli una delle versioni più recenti:
Possiedi già questo prodotto?
I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.
I clienti hanno visto anche
Articoli
Plexcore® organic conductive inks are electronic grade inks formulated for use in the hole injection layers of OLEDs.
Organic Semiconductor Laser Materials
Organic photovoltaics (OPVs) represent a low-cost, lightweight, and scalable alternative to conventional solar cells. While significant progress has been made in the development of conventional bulk heterojunction cells, new approaches are required to achieve the performance and stability necessary to enable commercially successful OPVs.
A transparent conductive electrode (TCE) is an essential component of various optoelectronic devices such as solar cells, liquid-crystal displays (LCD), light-emitting diodes (LED), and touch screens.
-
The glass is coated one side or on both sides with ITO?
1 answer-
Helpful?
-
-
For Product 703184, what is the melting point of ITO coated slide, square?
1 answer-
Unfortunately, the melting point is not determined for this product.
Helpful?
-
-
What is the Department of Transportation shipping information for this product?
1 answer-
Transportation information can be found in Section 14 of the product's (M)SDS.To access the shipping information for this material, use the link on the product detail page for the product.
Helpful?
-
-
For Product 703184, what are the thicknesses of the ITO (Indium Tin Oxide) layer?
1 answer-
For Product 703184, Indium Tin Oxide (ITO) Coated Glass Slide, Square, the ITO layer has a typical thickness of 300-600 Å (or 30 to 60 nm).
Helpful?
-
Active Filters
Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..
Contatta l'Assistenza Tecnica.
